This manufacturer-approved Refrigerator Pantry End Cap Kit, also known as the Refrigerator Drawer Support, is a kit containing all parts of the Pantry End Cap. It snaps into place on the appliance’s ...
This water filter purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the...
This OEM Center Rail is a white plastic part which supports the crisper frame, which holds the crisper. Fifteen inches long and white in colour, if broken, the support may no longer hold properly. Re...
The pantry drawer lid helps keep everything inside the drawer, it acts as a cover and keeps your drawer at the proper temperature by creating a seal. If the door will not open or close, or if the draw...
This ice maker assembly is designed to produce and dispense ice efficiently within the freezer compartment of compatible refrigerator models. It includes a built-in shut-off arm and a wire harness for...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
If your fridge door is sweating or hard to open and close, the gasket might need replacing. This gray magnetic gasket helps seal the door tightly to keep cold air in and warm air out. It runs along al...
This electronic control board is a critical component in refrigerator systems, responsible for regulating temperature settings and managing cooling and defrost cycles. If your appliance is experiencin...
This water filter bypass cap is a genuine OEM component designed for select Whirlpool, Maytag, KitchenAid, and affiliated refrigerator models. Installed in place of the water filter, it allows uninter...
Running out of space in your fridge door? This clear, shallow bin is perfect for organizing jars, bottles, and small items. It’s made from sturdy plastic and fits right into the door—no tools needed. ...
$76.94
In Stock
Questions And Answers for WRF535SWHZ03
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
9 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sue
September 13, 2021
Door handle at the bottom has come off, how do you put it back on?
For model number WRF535SWHZ03
Hello Sue, Thank you for the question. The handle has 2 small set screws on the underside of the handle. You can loosen the screws and then line the handle up with the mounting screws on the door. If the Mounting screws came off with the handle, they can be removed from the handle when you loosen the small set screws and reattached to the door. Once the handle is lined up with the mounting screws, tighten the small set screws. This will hold the handle onto the door. We hope this helps!
Hi David,
Thank you for your question. There is no air filter listed for your refrigerator. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Shawn
January 21, 2023
Liking water filter assembly
For model number WRF535SWHZ03
Hello Shawn, Thank you for your inquiry. If you are looking to order the water filter, we show that the part number is PS11722130 for the model number that you have provided. We hope this helps.
How do I adjust the main doors? The manual says to use a 1/8 wrench on the underside of the door but our does not appear to have an exposed set screw to raise the door.
For model number WRF535SWHZ03
Hello Andrew, thank you for contacting us. We are providing you with the instructions that will help you align the doors.
1- Remove the base grill by unthreading the two screws.
2- Open the freezer drawer and rotate the brake feet. This will raise the front of the refrigerator.
3- To align the doors of the refrigerator, keep both doors closed and open the drawer.
4- Locate the bottom hinge pin, the alignment screw is inside the bottom hinge.
5- Pin until it is fully engaged in the alignment screw.
6- To raise the refrigerator door, turn the hex key to the right. To lower the door, turn the hex key to the left.
We hope this helps!
Was this helpful?
Thank you for voting!
Les
May 2, 2023
I’m looking for a filter for our water dispenser in the refrigerator. Do you have any?
For model number WRF535SWHZ03
Hello Les, Thank you for your inquiry. We show the compatible water filter as part# PS11722130. We hope this helps.
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
Having seen this problem before in other equipment so I had an idea where to look. Problem: the automatic defrost function was not operating. Looking through openings in the back panel of the freezer compartment, you could see the evaporator coils and fins were a solid chuck of ice. There are three logical components to check. Heater element, thermostat (located just above the evaporator) and a relay on the control board (located in the fridge control panel). Checked the heater with an ohm meter -- OK. The thermostat closes the circuit at around 20 degrees and opens at around 32 degrees. Pulled out the thermostat, wiring, fan unit. Everything unplugs, unscrews, and unclips, don't cut wires. Put the whole assembly in a friends freezer for an hour or so to see if the thermostat closes -- OK. Problem had to be with the control board. Replaced control board, reprogrammed it per included instruction. Everything is working again.
Removed the fruit & veggie drawers & the deli (pantry) drawer. Took out the 3 screws, removed the attached parts, put them on the replacement part, reattached it and put the drawers back in.
Here's the part I want to share: PartSelect had a expanded diagram showing the correct part and sufficiently detailed to figure out the repair before the part arrived. That's why I ordered from them. Secondly, I ordered the part Thursday morning--and the thing was sitting on my porch when I came back in from my evening out Saturday--2 days later!!!
