This manufacturer-approved Refrigerator Pantry End Cap Kit, also known as the Refrigerator Drawer Support, is a kit containing all parts of the Pantry End Cap. It snaps into place on the appliance’s ...
This water filter purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the...
This OEM Center Rail is a white plastic part which supports the crisper frame, which holds the crisper. Fifteen inches long and white in colour, if broken, the support may no longer hold properly. Re...
The pantry drawer lid helps keep everything inside the drawer, it acts as a cover and keeps your drawer at the proper temperature by creating a seal. If the door will not open or close, or if the draw...
This ice maker assembly is designed to produce and dispense ice efficiently within the freezer compartment of compatible refrigerator models. It includes a built-in shut-off arm and a wire harness for...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
If your fridge door is sweating or hard to open and close, the gasket might need replacing. This gray magnetic gasket helps seal the door tightly to keep cold air in and warm air out. It runs along al...
This electronic control board is a critical component in refrigerator systems, responsible for regulating temperature settings and managing cooling and defrost cycles. If your appliance is experiencin...
This water filter bypass cap is a genuine OEM component designed for select Whirlpool, Maytag, KitchenAid, and affiliated refrigerator models. Installed in place of the water filter, it allows uninter...
Running out of space in your fridge door? This clear, shallow bin is perfect for organizing jars, bottles, and small items. It’s made from sturdy plastic and fits right into the door—no tools needed. ...
$76.94
In Stock
Questions And Answers for WRF535SWHZ01
Ask our experts a question about this model and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
William
January 20, 2024
Is there a door switch or other mechanism that cuts icemaker off other than arm on icemaker itself. This is on bottom drawer freezer.
For model number WRF535SWHZ01
Hi William, thank you for the question. Based on our research, your ice maker has an automatic shutoff. As ice is made, the ice cubes will fill the ice storage bin and the ice cubes will raise the wire shutoff arm to the off position. It does not have other mechanism to shut off. We hope this information helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Kathryn
March 26, 2025
I cannot get any water to fill the ice maker. Water will come through to water dispenser. Where do I need to start to fix this problem?
For model number WRF535SWHZ01
Hi Kathryn, thank you for reaching out. We would suggest checking the water inlet valve, part number PS11754529. You may need to replace it to fix the issue. We hope this sorts out your problem!
I replaced water filter 24 hours ago and now the ice maker will not work
For model number WRF535SWHZ01
Hello Dennis, thank you for writing. Make sure you check the nipple where the filter goes. If it's not getting all the way pushed in, you will get a trickle of water or nothing. Proper alignment is the key. We hope this helps.
Was this helpful?
Thank you for voting!
Bradford
September 27, 2022
I need a freezer bulb
For model number WRF535SWHZ01
Hi Bradford, thank you for contacting us. According to our research the freezer bulb, part number PS12717432, will fit your model number. If you require assistance to place an order, please contact customer service. We hope that helps!
What is the black button by the ice machine for? I know if the bar is down, it will make more ice. If it is up and will not make ice. We just don't know how the button affects things?
For model number WRF535SWHZ01
Hello Sheron, thank you for getting in touch. According to our research, the black button/arm gives you manual control over the ice maker's on/off switch. The black button located near the ice machine probably functions as a manual shut-off for the ice maker. When the arm is in the down position, the ice maker is activated and will generate ice until the bin reaches its capacity, at which point the arm is raised. Conversely, when the arm is in the up position, the ice maker is deactivated and will cease to produce ice, irrespective of the level of ice in the bin. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
Having seen this problem before in other equipment so I had an idea where to look. Problem: the automatic defrost function was not operating. Looking through openings in the back panel of the freezer compartment, you could see the evaporator coils and fins were a solid chuck of ice. There are three logical components to check. Heater element, thermostat (located just above the evaporator) and a relay on the control board (located in the fridge control panel). Checked the heater with an ohm meter -- OK. The thermostat closes the circuit at around 20 degrees and opens at around 32 degrees. Pulled out the thermostat, wiring, fan unit. Everything unplugs, unscrews, and unclips, don't cut wires. Put the whole assembly in a friends freezer for an hour or so to see if the thermostat closes -- OK. Problem had to be with the control board. Replaced control board, reprogrammed it per included instruction. Everything is working again.
Removed the fruit & veggie drawers & the deli (pantry) drawer. Took out the 3 screws, removed the attached parts, put them on the replacement part, reattached it and put the drawers back in.
Here's the part I want to share: PartSelect had a expanded diagram showing the correct part and sufficiently detailed to figure out the repair before the part arrived. That's why I ordered from them. Secondly, I ordered the part Thursday morning--and the thing was sitting on my porch when I came back in from my evening out Saturday--2 days later!!!
