This 40w light bulb is a replacement bulb constructed of glass and metal. It is an easy-to-install electrical part which produces 40w of light. If the bulb won't light up then it may be broken and sho...
This Grease Filter is constructed of Acrylonitrile Butadiene Styrene and is used to trap grease and help eliminate odors from the exhaust air while cooking. It attaches onto the exhaust and is rated ...
This three-terminal switch fits your microwave door. This part is mostly black in color and is about 1.5 inches with metal terminals. You might need to replace this part if your microwave is not heati...
This door interlock switch is a genuine replacement part designed for use in microwaves. It serves a critical safety function by preventing the microwave from operating when the door is open. Because ...
The light socket in your microwave houses the light bulb and connects it to the power source. The light bulb will screw into it, so the light bulb will be held in place. Be very careful when installin...
$14.12
In Stock
Questions And Answers for WMH31017HZ0
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
13 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Amanda
February 1, 2023
My Whirlpool microwave is mounted over the stove. The light under the microwave (to shine on the stovetop) has gone out. Where can I get a replacement lightbulb for underneath the microwave?
For model number WMH31017HZ0
Hi Amanda,
Thank you for your question. The part number listed under your model number for the light bulb is PS2376034. If you would like to place an order for it, please call our customer service line and anyone will be happy to assist you. We look forward to hearing from you!
Light went out. Removed the original bulb and the glass separated from the bulb base. Got the base out but the replacement bulb will not illuminate. Microwave functions but no light. Is there a fuse in that circuit?
For model number WMH31017HZ0
Hi Bill, thank you for the question. According to our research, there is no fuse for the light. We would recommend checking the wiring are attached to the socket and are in good condition. If that is good, we would suggest replacing the light socket, part number PS2342199. We hope this helps, good luck with this repair!
Can I buy a replacement door for my above the stove microwave model #WMH31017HZ-0?
For model number WMH31017HZ-0
Hi Cori, thank you for reaching out. Yes, the door assembly for your model is part number PS12348264. You can purchase it on our site. We hope that helps!
The light does not work. How do i change the light. I cant get the bulb to come out.
For model number WMH31017HZ0
Hello and thank you for writing.
For your convenience, we have attached the link to our repair video. We hope this helps. Good luck with your repair.
https://www.youtube.com/watch?v=8nyWSG08-t0&feature=emb_title
Light bulb PS2376034.
My microwave heats but the exhaust fan does not seem to be working
For model number WMH31017HZ0
Hello Daniel, thank you for your question. We have researched your model number, we suggest that you test the fan. To determine if the fan motor is defective, remove the fan motor from the microwave and try turning the fan blades by hand. If the blades do not turn freely, replace the fan motor, part PS12749476. If the fan blades do turn freely, use a multimeter to test the motor for incoming power and for continuity. If the motor has power but won’t run, replace it. If the motor does not have continuity, replace it.
The nightmare was that this microwave is installed under the cabinet....in order to get to the light bulb I had to pull out my stove then squeeze into the space between the stove and counter....my old microwave light bult was much easier to change.....Shame on Whirlpool for making this so difficult.....must be a better way to cover the light bulb so that we do not need a screwdriver to remove the door to get to the light bulb
Ordered top & bottom micro-switches and mounting plate parts. Internet reviews could not find specifics if the issue was due to a top/bottom or combination of micro-switch or mounting plate failure. Pulled the plug. Removed the top vent assembly cover held in by 2 Phillips screws inside the vent. Removed the control panel held in by 1 Phillip screw at the top vent assembly area. Lifted control panel upward to release the catch and moved it off to the side - didn't disconnect any leads. Used a Torx bit to remove the door switch mounting plates at the front and pulled the plates through the opening from the control panel. Documented the wire color code connections, the top plate uses 2 micro's with one using both the closed & open contact. Installed the respective micros on the mounting plates and worked backwards with the wiring and removal steps. Once completed, the open/close sensing has worked every time.
