WMH31017HW2 Whirlpool Microwave - Overview
Sections of the WMH31017HW2
[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Light Bulb - 40W
PartSelect #: PS2376034
Manufacturer #: 8206232A
This 40w light bulb is a replacement bulb constructed of glass and metal. It is an easy-to-install electrical part which produces 40w of light. If the bulb won't light up then it may be broken and sho...
$11.26
In Stock
Order within the next 9 hrs and your part ships today!
Grease Filter
PartSelect #: PS3650910
Manufacturer #: W10208631A
This Grease Filter is constructed of Acrylonitrile Butadiene Styrene and is used to trap grease and help eliminate odors from the exhaust air while cooking. It attaches onto the exhaust and is rated ...
$44.92
In Stock
Order within the next 9 hrs and your part ships today!
Door Switch - 3 Terminal
PartSelect #: PS10057151
Manufacturer #: W10727360
This three-terminal switch fits your microwave door. This part is mostly black in color and is about 1.5 inches with metal terminals. You might need to replace this part if your microwave is not heati...
$13.12
In Stock
Order within the next 9 hrs and your part ships today!
Mounting Plate
PartSelect #: PS12074431
Manufacturer #: W11025649
$27.25
In Stock
Order within the next 9 hrs and your part ships today!
R Ceramic Fuse 20 A
PartSelect #: PS17629444
Manufacturer #: W11707984
This part protects the microwave by shutting it off if there is an electrical surge.
$44.95
In Stock
Order within the next 9 hrs and your part ships today!
DIODE
PartSelect #: PS12584264
Manufacturer #: W11256462
This part allows power to go one way but not the other.
$37.43
In Stock
Order within the next 9 hrs and your part ships today!
Microwave Door Interlock Switch
PartSelect #: PS2361111
Manufacturer #: W10269458
This door interlock switch is a genuine replacement part designed for use in microwaves. It serves a critical safety function by preventing the microwave from operating when the door is open. Because ...
$42.70
In Stock
Order within the next 9 hrs and your part ships today!
Cook Tray
PartSelect #: PS12728436
Manufacturer #: W11367904
This glass turntable tray helps food cook evenly by rotating inside the microwave. Verify size and fitment before ordering.
$114.55
In Stock
Order within the next 9 hrs and your part ships today!
Microwave Damper
PartSelect #: PS11728088
Manufacturer #: W10843943
This assembly includes the damper door and frame.
$83.55
In Stock
Order within the next 9 hrs and your part ships today!
Microwave Turn Ring
PartSelect #: PS12584163
Manufacturer #: W11252182
This support ring sits underneath the glass turntable tray.
$49.79
In Stock
Order within the next 9 hrs and your part ships today!
Microwave Top Mounting Screw
PartSelect #: PS11744892
Manufacturer #: WP8169704
This screw is sold individually.
$11.73
In Stock
Order within the next 9 hrs and your part ships today!
Light Socket
PartSelect #: PS2342199
Manufacturer #: W10210871
The light socket in your microwave houses the light bulb and connects it to the power source. The light bulb will screw into it, so the light bulb will be held in place. Be very careful when installin...
$14.77
In Stock
Order within the next 9 hrs and your part ships today!
Questions And Answers for WMH31017HW2
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mary
September 9, 2021
My light has burned out underneath the microwave but when replaced with new bulbs it only burns low light and it can not be cut off. I have tried 2 new bulbs and the same thing happens. Is there a special bulb that must come from you to make it work properly.
For model number WMH31017HW2
Hello Mary, Thank you for the question. Yes, the OEM dimmer Bulb for this model would need to be ordered. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2376034. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Light Bulb - 40W
$11.26
In Stock
Pamela
December 30, 2022
We are looking for the screws that hold the light cover in place
For model number WMH31017HW2
Hello Pamela, thank you for the question. The part PartSelect Number PS1155993 is just the lens. There is no screw included or on the parts list. We hope this information will help you.
Was this helpful?
Thank you for voting!
Related Parts:
Light Lens
$20.67
Special Order
Linda
March 6, 2023
We need a computer panel
For model number WMH31017HW2
Hello Linda, thank you for reaching out. The part you are looking for is the control panel, part number PS12584165. We hope that helps!
Was this helpful?
Thank you for voting!
Related Parts:
Control Panel
$93.45
In Stock
Patrick
July 27, 2021
Replaced overhead bulb second time, and this time it stays on, it won't turn off or cycle.
For model number WMH31017HW2
Hi Patrick,
Thank you for your question. If the bulb is not turning off, open the door and then close it with a bit of force to see if this shuts it off. If this does not help, try unplugging the microwave for a few seconds to see if the power interruption resets the microwave. If this does not help, you will need to check the door switches and the electronic control board. We hope this helps! If you have any questions, please let us know.
Was this helpful?
Thank you for voting!
Related Parts:
Microwave Door Interlock Switch
$42.70
In Stock
Door Switch - 3 Terminal
$13.12
In Stock
Door Switch - 3 Terminal
$13.12
In Stock
Service Assembly
$134.39
In Stock
- < Prev
- 1
- Next >
Common Symptoms of the WMH31017HW2
[Viewing 8 of 8]Won’t turn on
Fixed by
these parts
these parts
Show All
No heat
Fixed by
these parts
these parts
Show All
Door not closing properly
Fixed by
these parts
these parts
Show All
Tray won’t turn
Fixed by
these parts
these parts
Show All
Exhaust fan not working
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Doesn’t shut off
Fixed by
these parts
these parts
Show All
Touchpad does not respond
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
light bult needed to be replaced
The nightmare was that this microwave is installed under the cabinet....in order to get to the light bulb I had to pull out my stove then squeeze into the space between the stove and counter....my old microwave light bult was much easier to change.....Shame on Whirlpool for making this so difficult.....must be a better way to cover the light bulb so that we do not need a screwdriver to remove the door to get to the light bulb
Parts Used:
-
Deborah from Millersville, MD
-
Difficulty Level:Difficult
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
220 of 326 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door switch inconsistent operation for Open/Close sensing.
Ordered top & bottom micro-switches and mounting plate parts. Internet reviews could not find specifics if the issue was due to a top/bottom or combination of micro-switch or mounting plate failure. Pulled the plug. Removed the top vent assembly cover held in by 2 Phillips screws inside the vent. Removed the control panel held in by 1 Phillip screw at the top vent assembly area. Lifted control panel upward to release the catch and moved it off to the side - didn't disconnect any leads. Used a Torx bit to remove the door switch mounting plates at the front and pulled the plates through the opening from the control panel. Documented the wire color code connections, the top plate uses 2 micro's with one using both the closed & open contact. Installed the respective micros on the mounting plates and worked backwards with the wiring and removal steps. Once completed, the open/close sensing has worked every time.
Parts Used:
-
Mark from HOMER GLEN, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
141 of 170 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bulb "burnt out"
Removed 1 screw, removed "burnt out" bulb and replaced it with new bulb.
Parts Used:
-
Joseph from Pembroke, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
96 of 160 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!