This 40w light bulb is a replacement bulb constructed of glass and metal. It is an easy-to-install electrical part which produces 40w of light. If the bulb won't light up then it may be broken and sho...
This Grease Filter is constructed of Acrylonitrile Butadiene Styrene and is used to trap grease and help eliminate odors from the exhaust air while cooking. It attaches onto the exhaust and is rated ...
This three-terminal switch fits your microwave door. This part is mostly black in color and is about 1.5 inches with metal terminals. You might need to replace this part if your microwave is not heati...
This door interlock switch is a genuine replacement part designed for use in microwaves. It serves a critical safety function by preventing the microwave from operating when the door is open. Because ...
The light socket in your microwave houses the light bulb and connects it to the power source. The light bulb will screw into it, so the light bulb will be held in place. Be very careful when installin...
$14.12
In Stock
Questions And Answers for WMH31017HS0
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michael
July 25, 2021
Microwave is only 4 years old--just stopped working today..
turns on but doesn't heat but it does sound louder.
For model number WMH31017HS0
Hi Michael,
Thank you for your question. If your microwave will not turn on, there are some parts that you will need to check to see which one is causing the issue. You will need to check the door switches, the fuse and the door latch assembly. We hope this helps! Good luck with the repair!
Hello Wayne, thank you for reaching out. According to our research, with the microwave oven in standby mode, touch the timer control, enter time, then touch the timer control or the start control. Cook functions may be entered while the timer is counting down. To cancel the timer, touch timer control while the timer countdown is active in the display. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ron
December 30, 2023
Why over stove light doesn’t shut off.
For model number WMH31017HS0
Hi Ron, thank you for getting in touch. We would recommend checking the control panel, part number PS12348383. You may need to replace it to fix the issue. We hope that helps!
The nightmare was that this microwave is installed under the cabinet....in order to get to the light bulb I had to pull out my stove then squeeze into the space between the stove and counter....my old microwave light bult was much easier to change.....Shame on Whirlpool for making this so difficult.....must be a better way to cover the light bulb so that we do not need a screwdriver to remove the door to get to the light bulb
Ordered top & bottom micro-switches and mounting plate parts. Internet reviews could not find specifics if the issue was due to a top/bottom or combination of micro-switch or mounting plate failure. Pulled the plug. Removed the top vent assembly cover held in by 2 Phillips screws inside the vent. Removed the control panel held in by 1 Phillip screw at the top vent assembly area. Lifted control panel upward to release the catch and moved it off to the side - didn't disconnect any leads. Used a Torx bit to remove the door switch mounting plates at the front and pulled the plates through the opening from the control panel. Documented the wire color code connections, the top plate uses 2 micro's with one using both the closed & open contact. Installed the respective micros on the mounting plates and worked backwards with the wiring and removal steps. Once completed, the open/close sensing has worked every time.
