This 40w light bulb is a replacement bulb constructed of glass and metal. It is an easy-to-install electrical part which produces 40w of light. If the bulb won't light up then it may be broken and sho...
This Grease Filter is constructed of Acrylonitrile Butadiene Styrene and is used to trap grease and help eliminate odors from the exhaust air while cooking. It attaches onto the exhaust and is rated ...
This three-terminal switch fits your microwave door. This part is mostly black in color and is about 1.5 inches with metal terminals. You might need to replace this part if your microwave is not heati...
This door interlock switch is for microwaves.
Door interlock switch prevents the microwave from starting when the door is open.
Because the microwave shielding and interlock switches must be pro...
The light socket in your microwave houses the light bulb and connects it to the power source. The light bulb will screw into it, so the light bulb will be held in place. Be very careful when installin...
Ask our experts a question about this model and we'll get back to you as soon as possible!
8 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Connie
March 27, 2023
All of a sudden when I push the buttons for starting the microwave, it does not have sound. Does not sound when finished either. Suggestions?
For model number WMH31017FB0
Hi Connie, thank you for contacting us. According to our research, the tones can be turned on or off in this model. To turn the tones on, press the number keypad 2, and hold it for 3 seconds until a confirmation tone sounds. Also, check if the energy saver mode is not turned on, and reset the microwave by pressing and holding the start control for a few seconds. We hope this sorts out your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ron
October 25, 2023
The over the counter light is on all the time. Can you confirm this? Thank you.
For model number WMH31017FB0
Hello Ron, thank you for getting in touch. Based on the description that you have provided, we would recommend checking the light socket, part number PS2342199, to fix the issue. We hope this solves your problem!
The over the counter light stays on all the time. Your first answer was the socket. How can this be?
I have seen a video in which the man replaces triac 7104. What are the specs/ make and model of the triac so I can order a replacement?
Thank you.
For model number WMH31017FB0
Hi Ron, thank you for contacting us. According to our research, the transistor is part of the control board. It does not come separately. The compatible control board for your model is PS16620391. We hope this helps.
Hello Marcella, Thank you for the question. The Glass Turn Table for your model is PartSelect Number PS12728436. It is approximately 11" in diameter. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Display says "Door" assume its the sensor, if so can I order and replace. Cleaned seal around door, unplugged and replugged. Serial no TP70112914. Would need part number if you feel its what I suggested
For model number WMH31017FB0
Hello Ross, Thank you for the question. We suggest testing the Door Switches with a Multimeter. You can test to see if they are reading Open or Closed. There should be markings on the switch saying what it needs to read. We hope this helps!
The nightmare was that this microwave is installed under the cabinet....in order to get to the light bulb I had to pull out my stove then squeeze into the space between the stove and counter....my old microwave light bult was much easier to change.....Shame on Whirlpool for making this so difficult.....must be a better way to cover the light bulb so that we do not need a screwdriver to remove the door to get to the light bulb
Ordered top & bottom micro-switches and mounting plate parts. Internet reviews could not find specifics if the issue was due to a top/bottom or combination of micro-switch or mounting plate failure. Pulled the plug. Removed the top vent assembly cover held in by 2 Phillips screws inside the vent. Removed the control panel held in by 1 Phillip screw at the top vent assembly area. Lifted control panel upward to release the catch and moved it off to the side - didn't disconnect any leads. Used a Torx bit to remove the door switch mounting plates at the front and pulled the plates through the opening from the control panel. Documented the wire color code connections, the top plate uses 2 micro's with one using both the closed & open contact. Installed the respective micros on the mounting plates and worked backwards with the wiring and removal steps. Once completed, the open/close sensing has worked every time.