WM45B Bostitch Nailer - Overview

Sections of the WM45B

[Viewing 1 of 1]
Page A Diagram and Parts List for Bostitch Nailer
Page A
Keep searches simple, eg. "belt" or "pump".
Label,Platform Adjust – Part Number: 103648
Label,Platform Adjust
PartSelect #: PS10245667
Manufacturer #: 103648
  No Longer Available
Assembly,Trip Arm – Part Number: 102996
Assembly,Trip Arm
PartSelect #: PS10245632
Manufacturer #: 102996
  No Longer Available
Pawl,Check – Part Number: 102150
Pawl,Check
PartSelect #: PS10245591
Manufacturer #: 102150
  No Longer Available
Seal,Nose – Part Number: 102301
Seal,Nose
PartSelect #: PS10245598
Manufacturer #: 102301
  No Longer Available
Piston/driver Assy – Part Number: 101961
Piston/driver Assy
PartSelect #: PS10245581
Manufacturer #: 101961
  No Longer Available
Spring Assembly – Part Number: 101773
Spring Assembly
PartSelect #: PS10245574
Manufacturer #: 101773
  No Longer Available
Driver Guide – Part Number: 159637
Driver Guide
PartSelect #: PS10246453
Manufacturer #: 159637
  No Longer Available
Collar,Spring – Part Number: N65045
Collar,Spring
PartSelect #: PS10250092
Manufacturer #: N65045
  No Longer Available
C-RING – Part Number: 9R184453
C-RING
PartSelect #: PS12508038
Manufacturer #: 9R184453
$5.95
  Special Order
Ring,Cylinder Sleeve – Part Number: 100181
Ring,Cylinder Sleeve
PartSelect #: PS10245440
Manufacturer #: 100181
  No Longer Available
Piston,Drive – Part Number: 100211
Piston,Drive
PartSelect #: PS10245446
Manufacturer #: 100211
  No Longer Available
Gasket,frame/cap – Part Number: 100212
Gasket,frame/cap
PartSelect #: PS10245447
Manufacturer #: 100212
It is a genuine Bostitch item that is supplied directly from the original equipment manufacturer for use with nailers. This replacement gasket is utilized to provide an air-tight seal between the end ...
  No Longer Available
Back to Top
View More

Questions And Answers for WM45B

Be the first to ask our experts a question about this model!

Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
would not fire nails
remove 2 Philips head screws, drive out drift pins with drill bit. Remove TVA6 replace with new TVA6 making sure TVA6 is completely seated and slots are aligned with drift pin holes! Drive in drift pins. Replace trigger and screws.
This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem resolved
Parts Used:
KIT-TRIGGER VALVE
  • Richard from Bogalusa, LA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
6 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top
View More