This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This door bellow, also referred to as a door seal gasket, is an OEM replacement component designed for various front-load washing machine models. Made from flexible gray rubber, it forms a secure barr...
This front-load door hinge is a genuine replacement component designed to support the door on compatible washers and dryers, ensuring smooth and secure pivoting during opening and closing. Constructed...
This hose attaches to water pump assembly.
NOTE: As per the manufacture if the washer has an Eco Ball, it's no longer needed when the new hose is installed.
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
Having a problem with a funky-smelling washing machine, or one that just doesn't seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This p...
This is an actuator switch to trigger bleach, detergent, or fabric softener housings to be dispensed into the tub of your washing machine. If your detergent cups are not dispensing, you may need to re...
Upgrading your laundry room? We can help you save space effortlessly with our Whirlpool Long Vent Dryer Stack Kit. Designed specifically for certain Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Ing...
Are you looking to revive your washing machine to its optimal performance? Meet our genuine Water Inlet Valve from Whirlpool. This simple yet vital part is designed to control the water flow precisely...
$165.17
In Stock
Questions And Answers for WFW94HEXW0
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jason
March 14, 2020
Heard the washer make a odd brief noise then a few minutes later the error codes alarm went off. I believe they were f6 e2(90% sure). The cycle seem to be in the rinse stage when it stopped. The door lock was on for a few minutes til it unlocked for me to unload the wet clothes. I tried starting a new wash cycle but the door will lock but the cycle never starts. I then tried to run the diagnostic test but i can’t even get to the c00 on the display screen to run it.
For model number WFW94HEXW0
Hi Jason,
Thank you for your question. The F6-E2 error code is letting you know that there is a communications error between the user interface board and the main control board. You can try to remove the error code by resetting it. The washer can be removed by unplugging the washer for 5 minutes and plugging it back in. If the error code returns, you will check the parts to see which one is causing the issue. We hope this helps. Thank you and have a great day.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Roberto
October 11, 2022
I have 2 error EO1 and FO6
For model number WFW94HEXW0
Hey Roberto, thank you for your inquiry. We have researched your model and found that the error code e01 f06 indicates a connection problem between the central module and the engine control microcircuit. This means that there could be a problem with either one or both of the boards. To fix this error code you may need to replace the motor control board, part number PS11753928. If this does not take care of the issue, you may need to replace the electric control board, part number PS5573780. We hope this helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
Opened the front panel with 3 crews T-25 or socket wrench. Panel comes off right away.
Look for the leak. Determined it was the hose. Use power pliers to remove the clamp.
The small clamp was easy. The big one I had to use my yoga to get to it. It probably would had been easy from the back panel but moving the machine requires brute force.
Once the hose was out I found some bra under wires which is what probably punctured the hose.
Removed the front filter and found a bunch of nails.
Assembly was much easier and placed clamps so that if needed it would be a lot easier to remove and replace.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Using the Torx Screwdriver, we removed the door from the unit. Then we removed all of the screws on the inside of the washer door. After that we flipped it over and opened it up exposing the inside. We couldn't separate them entirely because there was a screw under the latch piece that we couldn't figure out how to get to. However with all the screws out on the inside of the door, we did have enough room to open it up and access the place cover that holds the hinges in. Once we accessed that we removed the roller tips from the old unit and placed them on the new one. Then we reversed the process. With a couple screws in we realized we had put the hinge in reversed from what it needed to be, so we reopened it and switched it around. Then completed replacing all the screws and reattached it to the washer. It opens and closes perfectly and we saved a couple hundred dollars for sure, as the quote to come out had been a $150 trip charge.
