This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This part is located behind the control panel. It helps determine the level of water in the washer. As the water fills the hose, while tub is filling, it will push the air against a diaphragm inside t...
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Vik
January 29, 2022
Hi i'm looking for the door boot seal for the Whirlpool wfw92hefco. Please let me know if you carry this.
For model number WFW92HEFC0
Hello Vik, thank you for writing. We have researched the model you have provided and have found the part you are looking for is called Bellow PartSelect Number PS12348225. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Irene
September 9, 2023
Load and go dispenser does no work any longer. Lights up but doesn’t dispense, I now have to put detergent by pouring in the tub then starting.
For model number WFW92HEFC0
Hi Irene, thank you for getting in touch. If the load-and-go dispenser does not work, it is most likely faulty and may need to be replaced. The part number is PS3418101. We hope this helps!
Hello Alberto, thank you for getting in touch. The door boot seal you are looking for is part number PS12348225. If you need help placing an order, customer service is open 7 days a week!
Hello and thank you for writing.
The detergent dispenser is not detected in the dispenser. Be sure the dispenser is inserted properly. Be sure the dispenser drawer is completely closed.
If this does not fix this problem then your dispenser PS11731672 might be damaged and possibly needs to be replaced. We hope this helps. Please contact us anytime.
Looking for the electronics part of the control interface as the lights/settings do not follow the dial position.
For model number WFW92HEFC0
Hi Kirk, thank you for your inquiry. We have researched the model you have provided and have found that the part you are looking for is part number PS11769766. We hope this helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
First some background. The door locked up the first time when appliance was less than one year old. The "Maytag Repairman" finally succeeded in getting the door open after propping up the front of the machine and fumbling around underneath for a period of time and then assured me the problem was solved. The problem recurred less than a year later, and I called another repairman who seemed to have an easier time of it, and charged $293.42 to replace the water level switch. About six months later the same problem recurred and I took the cover off the top of the machine and found there a booklet "For Service Technician's Use Only". VERY HELPFUL. Told how extremely easy it was to unlock door - took about five seconds. Replacing the switch itself involved pulling one tubing off and disconnecting one elec connection from old switch and replacing on new switch. Total cost $50 plus a few dollars for shipping.
Turned washer on its side. Pulled the bottom plate off. Then unplugged the electrical lines. Then unbolted the drain pump and bolted the new drain pump in. Then reversed the process.