This part helps keep your front-load washer safe and working properly. It locks the door during cycles so it doesn’t open unexpectedly, and it also tells the washer when the door is shut so it can sta...
$156.03
In Stock
Order within the next 12 hrs and your part ships today!
Is your Samsung washing machine door glass broken or cracked? We've got just what you need to fix that problem. Introducing our Samsung Washer Door Glass ? a reliable, high-quality replacement part cr...
Introduce the Assembly Fixer Tub, a top-tier component designed to elevate your Samsung or Kenmore washer's performance. This high-quality part from revered brands, Samsung and Kenmore, is designed to...
$54.95
In Stock
Order within the next 12 hrs and your part ships today!
Discover the perfect solution for a faulty drain assembly with this Drain Hose Assembly from Samsung. This essential appliance part is ideally designed for Samsung Washers, ensuring top performance an...
This drain pump filter helps trap lint, debris, and small objects before they enter the pump system. By reducing blockages and improving water flow, it supports efficient drainage and helps protect in...
Ensure the longevity of your Samsung washing machine with this effective drain pump filter. Primarily, it functions as a safeguard, trapping lint and debris from drain water, greatly reducing the chan...
$38.95
In Stock
Order within the next 12 hrs and your part ships today!
Enhance the performance of your Samsung washing machine with this quality leveling leg. Providing essential support to your washer, it ensures stability and perfect balance during operation. Adjusting...
$45.95
In Stock
Order within the next 12 hrs and your part ships today!
Ensure the optimal performance of your Samsung Washer with the Tub Vent Hose. This genuine replacement part ensures that your washer drains water correctly, upholding the operational efficiency and lo...
$54.95
In Stock
Order within the next 12 hrs and your part ships today!
1. remove the three screws from the top backside of the top panel 2. push the top panel to the rear 1/8 to 1/4 inch 3. lift/rotate top panel from rear to front, set aside. 4. remove the three wire connectors from latch. 5. use #15 Torx to remove the three screws from the latch. 6. remove and replace part using top opening. 7. reverse order to finish.
I bought a new door lock for 132 dollars (item number PS2037196).
Ultimately you have to get to the inside of the machine where the door lock is located in order to see if you will need this door lock that I bought.
DISCONNECT POWER FROM MACHINE.
First take off the top by taking off the 2 screws on the back of the machine.
Second take off the control panel, I believe there are about 5 or 6 screws for that. (there's also a screw when you open up the detergent compartment on the bottom left- also, a lever must be pushed in order for the compartment to come off- it MUST be taken off).
Third unscrew the top of the front white plate.. there should be a 5 or 6 screws for that. You don't need to take off the entire front plate.
Finally unscrew 3 screws that hold the door lock in place .. make sure your hands is in the machine- the back of door lock to catch the lock when you're on the last screw.
Gently take out the door lock from the side with the cables attached by holding the white metal door open (it bends).
Try to pull on the bottom of the door lock (its a manual release). If it doesn't release you need to buy a new door lock like I did... if it does release then you don't need a door lock and just reassemble. (Note: You can also try plugging in the machine and THEN pulling down on the manual release. When I tried this the door lock just vibrated and nothing happened so I bought a new door lock.)
If you have the new door lock continue here:
Take out all 3 cables on the old door lock by pressing on the corresponding clips.
Attach the new door lock with the correct cables. Assemble machine back together.
