This part is a one-time use thermal fuse which attaches to the blower wheel housing of your clothes dryer. It cannot be re-set and must be replaced when there is no longer continuity between the pins....
$22.77
In Stock
Order within the next 11 hrs and your part ships today!
This dryer drum roller kit is designed to restore smooth and quiet operation in a wide range of dryer models. It includes two drum rollers, four tri-rings, and one to two retaining washers, providing ...
$22.56
In Stock
Order within the next 11 hrs and your part ships today!
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
$17.01
In Stock
Order within the next 11 hrs and your part ships today!
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$15.95
In Stock
Order within the next 11 hrs and your part ships today!
This dryer lint filter and screen assembly is a genuine replacement part designed to trap lint and fibers during the drying cycle, helping to maintain airflow and prevent blockages in the vent system....
$75.86
In Stock
Order within the next 11 hrs and your part ships today!
The idler pulley wheel provides the tension for a multi-ribbed belt and helps the belt to rotate the drum. The drum will not spin if the idler pulley fails to put the correct amount of tension on the ...
$22.35
In Stock
Order within the next 11 hrs and your part ships today!
This is a genuine OEM part. The push-to-start switch is composed of metal and plastic components. Compatible with dryers, the Whirlpool switch powers the appliance after the button is pressed. With a ...
$35.94
In Stock
Order within the next 11 hrs and your part ships today!
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This po...
$25.31
In Stock
Order within the next 11 hrs and your part ships today!
Questions And Answers for WET4024HW0
Ask our experts a question about this model and we'll get back to you as soon as possible!
18 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Erik
May 4, 2024
Hey guys! The washer doesn't seem to fill all the way, it gets to just above half. There's plenty of water pressure, ~80psi. And the inlet screens are clean.
For model number WET4024HW0
Hi Erik, thank you for the question. Based on the description that you have provided, we would recommend replacing the pressure switch, part number PS16875941, to fix the issue. Good luck with this repair!
THE UNIT HAS A GOOD POWER SOURCE OF 230VAC TO IT BUT IT DOES NOT COME ON. NO LIGHTS NOTHING. ALSO I NEED TO KNOW HOW TO DISSAMBLE THE UNIT SO I CAN REMOVE IT DUE TO A DIFFICULT LOCATION IT IS IN.
For model number WET4024HW0
Hello Stuart, Thank you for writing. This is normally an indication the Thermal Fuse is blown, PartSelect #: PS11741460. When the fuse blows it will cut power to the appliance. We linked a how to video that may help. Good luck with the repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Karin
August 19, 2021
My w machine on my stackable is not spinning it’s agitating drawing but not spinning. It’s new. Can i help u. I am a customer of parts select and ur company has always been top notch i recommend to all my friends thank u
Karin
For model number WET4024HW0
Hi Karin,
Thank you for your question. If your washer is not spinning, the part that fixes the issue the majority of the time is the door latch. You should also check the belt. You will find information on how to test these parts under Free Repair Help and Instant Repairman on our website. If you need to place an order for one of them, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
How do I remove the control panel to check the dryer switch?
For model number WET4024HW0
Hello Brandon, thank you for your question. Take off the timer knob and use a 1/4" hex head screw. Then, a flat head screwdriver would be used to slightly pry the sides of the console to remove it as there are two little lock tabs on each side. Then remove 4 screws on the console frame so that it can be pulled down. The Control panel is part PS12348267 and the Timer Knob is part PS10067044. The Timer is part PS11731277. The Push to start Button is PS12346962. And finally, the Push to start Switch is part PS11742178 and we have a video for you to access. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
hot and cold water wont fill at normal pressure put new valves and clean lines
For model number WET4024HW0
Hi Robert,
Thank you for your question. If water is trickling into the washer, check and make sure that both the hot and cold water faucets are fully opened. Also make sure that the hoses are positioned correctly and not kinked. If you recently replaced the water inlet valve and water is trickling into the washer, then you may need a plumber to come and inspect the water pressure in your house. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
First I unplugged the dryer, then removed the back panel, this exposed most all of the wiring and I could see the heater coils. Not knowing what the problem was I started looking at the coils and could not see any broken parts. So then checked the thermal fuse for continuity I removed the two wires from it with a small pair of needle nose pliers, it was held in place by two screws, once they were removed the fuse came out easily, I checked continuity with a volt meter placing the meter on X1 Ohms and could not get a reading. I replaced with a new one and put it all back together the way I took it apart. Then I plugged it in and it worked first time, I now have warm dry clothes.
Cleaning the lint out of the whole machine took quite a bit of time--it was everywhere. Underneath the lint trap was a collection that ultimately ruined the thermal fuse where it restricted the air flow considerably.
Ascertaining the problem was the most time consuming part.
The actual repair was quite simple and didn't take but 15-20 minutes.
Received your parts, Popped them both right into place, Even though only one side needed to be replaced, I wanted them to match up. It was amazing how easy this was. My husband was quite impressed I had ordered these rather then look for either a new or used dryer from some other source.
