This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
If your oven’s control panel is getting too hot or showing fan errors, this cooling fan might be the fix. It helps keep the electronics cool by circulating air behind the panel, which can prevent over...
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
This oven temperature sensor is designed to monitor and regulate the internal heat levels of your range, ensuring consistent and accurate cooking performance. It communicates directly with the control...
The light socket on your electric range connects the power source to the light bulb. If your oven light is malfunctioning, you may need to replace the light socket. The light socket is located in the ...
Use this scraper for your ceramic/glass cooktop. It has a retractable blade and is an all-purpose tool for cooktops, mirrors, windows and tile. Use it to also remove paint, paper, dirt, stickers and more.
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tiffany
September 24, 2025
Can this model be converted to propane? If so are the kits available
For model number WEG745H0FS1
Hello Tiffany, thank you for reaching out. Yes, the range can be converted to propane (LP). The conversion kit for the cooktop is part number PS12745741, and for the oven bake and broil is part number PS12070661. We hope this information is useful!
The oven was working fine set at 400 degrees bake. After sometime had passed baking sauce in a pot, I noticed the temp gauge I have hanging in the oven no longer said 400 degrees, but near 0. The oven still showed 'ON' and 400. Stuck my hand in the oven and sure enough no heat. I hit cancel and bake again 400, and started again which of course displayed low since it was no longer hot.
For model number WEG745H0FS1
Hi Scott, thank you for reaching out to PartSelect. Based on our understanding of the issue, we would suggest you checking the temperature sensor, part number PS11726314. Good luck with the repair!
So, if my oven wasn't getting hot, (meaning when set to 350, and after 30 minutes) on bake, but when I cancelled used connection it was fine, could this still be the temperature sensor?
For model number WEG745H0FS1
Hello Scott, thank you for your inquiry. We have concluded that the issue is with the temperature sensor, part number PS11726314. We would recommend replacing it to solve the problem. We hope this helps.
Hello Vivian, thank you for contacting us. The error code F2E0 indicates a problem with the touchpad. We would recommend checking the touchpad, part number PS10060052, to solve the problem. We hope this helps!
What is the recommended cleaning product/method for iron grates and burner caps? The "gas grate and drip pan cleaner" (31617a) listed in the manual accessories is unavailable.
For model number WEG745H0FS1
Hello Alice, thank you for writing. If your grates or caps are very dirty, create a paste by mixing three parts baking soda to one part water. Coat the grates in this mixture and set aside for 20 minutes. Wipe down the burners with a soft cloth. If you have coated the burners in baking soda paste, rinse this off first to avoid damaging the finish. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
I numbered every part. ex: 1 L., for first part removed left side. I used a magic marker to circle the holes and wrote the number of screws used on the part, set the srews in a separete place, so that I new where these screws went to. The cleanup was pretty time consuming, but I was able to keep my stove, when every repairman I called to fix my stove told me I was better off buying a new stove. ($600.00 stove 2 years old)Please Note: The insulation blanket needed for the entire stove is two pieces, the sides and top are one part # and the bottom and back, are another part #. I did not know this. I just purchased the top and sides. I got lucky, the back and bottom were still in good shape. So I guess I should have read the description of the part more carefully to see what it covers, before I ordered it. It took two people two hours to do the work, it was really nice to have an extra set of eyes, to remember what direction pieces of metal from the stove went. I would do it all over in a heart beat instead of buying a new stove.
Socket Lite come with clips attached to the outside of the housing. After you unhook the 3 lead wires that are attached to the unit. All you have to do is push in on the clips and release the unit. Then you snap in the new unit. Attach the 3 wire leads, put a oven bulb in the socket end, and the install the light cover
Removed oven from wall unit and took the back off. Removed the old socket assembly by depressing the ears and forcing unit into the oven. The electrical wires were easily removed since they are spade connections and slip off. They also are different sizes so that there is no chance of erroneously putting them back in an incorrect order. The new unit simply slips in from the front and snaps into place. The most difficult part of the entire process is removing the old unit. A little "friendly persuasion" is required to get the old unit out.
