This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
This oven temperature sensor is designed to monitor and regulate the internal heat levels of your range, ensuring consistent and accurate cooking performance. It communicates directly with the control...
The light socket on your electric range connects the power source to the light bulb. If your oven light is malfunctioning, you may need to replace the light socket. The light socket is located in the ...
This oven rack offers a sturdy, chrome-finished surface for baking, roasting, and broiling in your range. It fits a wide selection of compatible ovens and is built to handle high heat and frequent use...
This part helps your gas oven light properly. It creates the spark that ignites the burner and works with the safety valve to make sure everything runs safely. If your oven isn’t heating, only gets a ...
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mark
June 22, 2023
need LP conversion for this model gas stove?
For model number WEG515S0FS2
Hi Mark, thank you for reaching out. The part you need is LP Conversion Kit, part number PS11768752. We hope this helps!
Hello Sharon, thank you for writing. The knobs are sold separately as part PS16543519. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Front RHS burner control will not turn. Burner therefore does not burn!
For model number WEG515S0FS2
Hello Keith, thank you for asking. We would recommend checking the surface burner valve, part number PS11772916, to fix the issue. We hope this sorts out your problem!
Hello David, thank you for the question. According to our research, your model comes with 2 stove burners having the energy rating of 15000 BTU. For the other 2 stove burners, the energy rating is 9500 BTU, and 5000 BTU, respectively. The energy rating for the oven is 16,500 BTU. Glad to be of assistance!
Was this helpful?
Thank you for voting!
Mark
February 15, 2026
My problem is the oven portion was working intermittently. Now it won’t work @ all. I’m leaning towards the igniter. Can smell natural gas and no ignition. Any thoughts or tips would be appreciated!
Regards Mark
For model number WEG515S0FS2
Hello Mark, thank you for contacting us. The intermittent failure followed by a complete stop in your model indicates a fault in the oven igniter. The igniter must reach a specific temperature to draw enough electrical current to open the gas safety valve; as they age, they often become weak, causing the oven to light only sometimes before failing entirely. You may need to replace it to fix the issue. The part number is PS11747217. We hope this solves your problem!
I numbered every part. ex: 1 L., for first part removed left side. I used a magic marker to circle the holes and wrote the number of screws used on the part, set the srews in a separete place, so that I new where these screws went to. The cleanup was pretty time consuming, but I was able to keep my stove, when every repairman I called to fix my stove told me I was better off buying a new stove. ($600.00 stove 2 years old)Please Note: The insulation blanket needed for the entire stove is two pieces, the sides and top are one part # and the bottom and back, are another part #. I did not know this. I just purchased the top and sides. I got lucky, the back and bottom were still in good shape. So I guess I should have read the description of the part more carefully to see what it covers, before I ordered it. It took two people two hours to do the work, it was really nice to have an extra set of eyes, to remember what direction pieces of metal from the stove went. I would do it all over in a heart beat instead of buying a new stove.
Replaced igniter and also DSI/direct spark igniter did not fix problem. Called out repairman turned out to be bad gas valve. Replaced that part , now stove works fine.
After reading many forums found that this error happens when trying to clean the oven and there is a failure in the latch motor to lock the oven door. It was suggested 1st to just tunr the breaker off to the over wait and then turn it back on to see if the error would clear by itself. If not then you'll have to do what I did and buy a new Latch Motor and replace it. Fairly easy to do: ) Move oven to get to the back panel ) Disconnect oven from power ) Remove the 8 screws to get the back panel off ) REmove the Latch motor screws (2) and remove the motor after twisting to get the latch rod off ) Put in new latch motor by 1st putting the latch rod in the motor assembly ) Screw the new motor in place ) Replace back panel ) Power on Oven DONE!
