This dryer repair kit consists of five commonly replaced dryer parts: one multi-rib belt (part #661570V and measures 93 1/2 inches long), four drum support rollers, one idler assembly, nine tri-rings,...
$68.33
In Stock
Order within the next 12 hrs and your part ships today!
This Idler Pulley includes the tri-ring and gasket and everything included here is manufacturer-certified. This part maintains correct tension on the drive belt in order to spin the drum properly. If ...
$34.36
In Stock
Order within the next 12 hrs and your part ships today!
This drum support roller is sold individually. Most dryers require two. The tri-rings are included. This is a drum support roller for a dryer. It is a genuine replacement part. The part includes the d...
$28.93
In Stock
Order within the next 12 hrs and your part ships today!
The Drive Belt is a 93 1/2" belt which wraps around the dryer drum to allow tension and movement. If broken the dryer will not turn properly, or there may be loud noises. The part is rated as "medium"...
$27.99
In Stock
Order within the next 12 hrs and your part ships today!
This thermostat may differ in appearance, but functions the same as the original part. This part controls the temperature of the inside of the dryer drum and prevents the dryer from overheating.
$60.87
In Stock
Order within the next 12 hrs and your part ships today!
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
$17.11
In Stock
Order within the next 12 hrs and your part ships today!
This is the moisture sensor for your dryer. It helps detect the amount of moisture in your clothes during the dryer cycle. If you notice your clothes are still wet after an automatic dryer cycle is do...
$13.67
In Stock
Order within the next 12 hrs and your part ships today!
The idler pulley wheel is now sold with this arm. This idler pulley is for dryers.
Idler pulley maintains correct tension on the drive belt to spin the drum.
$34.16
In Stock
Order within the next 12 hrs and your part ships today!
Order within the next 12 hrs and your part ships today!
Questions And Answers for WED9200SQ1
Ask our experts a question about this model and we'll get back to you as soon as possible!
8 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Eric
February 20, 2020
If I turn on it will run but in 2 to 4 seconds it will stop and no power
For model number WED9200SQ1
Hello Eric, Thank you for the question. We suggest testing the Internal-Bias Thermostat PartSelect Number PS11746740. The reading for the internal bias thermostat should read zero. If it is not zero then you will have to replace the thermostat. I hope this helps. Thank you and have a great day!
I need part to reverse the dryer door and instructions. It currently bolted on the right side; I want to move to left.
For model number WED9200SQ1
Hello Darlene, Thank you for the question. Remove the screws that hold the hinge to the washer front. After the screws are all out completely, lift on the door and the door and hinge will come off. Now lay the door assembly on a soft surface like a towel or somewhere the door and the surface will not get damaged. Remove the screws holding the hinge to the door. Screw the door hinge to the door on the opposite side of the door to reverse the opening direction and reverse steps to reinstall the door. You can use the same hinge for left and right side, however you will need a Left Side Hinge Cover, Manufacturer Part Number W10180119. We hope this helps, good luck with this repair!
Hello Mervin, Thank you for the question. The F01 Error code means there is something wrong with the control board or one of the components connected to it. We suggest checking the wiring to make sure there is no damage or loose. If the wiring is good, you may need to replace the Control Board. We looked up the part and it is listed as No Longer Available/Discontinued. There are no part substitutions listed. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers and contact us back with the updated substitution number. We hope this helps!
Was this helpful?
Thank you for voting!
Victor
October 4, 2022
A while back I replace the dryer repair kit and it was working fine. About a month ago the drum will not turn as if the pulley was not strong enough to move it or if it got stuck. I sometime move the drum manually and it gave it enough power to move it slow but had to add more time to the dryer in order to dry the clothes. Unfortunately, this cause the belt to brake. What part/s should I replace besides the belt of course. Thanks
For model number WED9200SQ1
Hi Victor,
Thank you for your question. Aside from the belt, you should also check the rollers and the idler pulley. The part numbers listed under your model number for these parts are PS11722115, PS11752609 and PS334244. If you would like to purchase the repair kit, the part number listed for it is PS373088. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
My dry just stop working and is smoking won't power on but when I try it starts to smoke what do I do
For model number WED9200SQ1
Hello Victoria, thank you for your inquiry. One cause of a dryer smoking is a Clogged Lint Vent. Another may be a blown thermostat PS991443 that can cause the temperature inside the dryer to rise and cause the dryer to smoke. The belt PS11722115 may be worn or slipping and cause it to smoke. We hope this helps.
Received your parts, Popped them both right into place, Even though only one side needed to be replaced, I wanted them to match up. It was amazing how easy this was. My husband was quite impressed I had ordered these rather then look for either a new or used dryer from some other source.
I can't believe I waited so long to find this part and do this. I got the package very fast, opened it, took the piece to my dryer and popped it into place with my fingers. It worked perfectly! this took all of two minutes and saved me from having to hold the dryer door closed with a stick. Thank you, thank you!!!
