This part is a one-time use thermal fuse which attaches to the blower wheel housing of your clothes dryer. It cannot be re-set and must be replaced when there is no longer continuity between the pins....
This dryer repair kit consists of five commonly replaced dryer parts: one multi-rib belt (part #661570V and measures 93 1/2 inches long), four drum support rollers, one idler assembly, nine tri-rings,...
This Idler Pulley includes the tri-ring and gasket and everything included here is manufacturer-certified. This part maintains correct tension on the drive belt in order to spin the drum properly. If ...
When connected to electricity the dryer heating element glows red hot and generates heat. When air is blown over it, it heats the air which is used to dry the clothes. The heating element fits inside ...
This drum support roller is sold individually. Most dryers require two. The tri-rings are included. This is a drum support roller for a dryer. It is a genuine replacement part. This part is sold separ...
This dryer lint filter is designed to capture lint and debris during the drying cycle, helping maintain airflow and prevent potential fire hazards. Measuring approximately 12.5 inches wide by 10.5 inc...
The Drive Belt is a 93 1/2" belt which wraps around the dryer drum to allow tension and movement. If broken the dryer will not turn properly, or there may be loud noises. The part is rated as "medium"...
This thermostat may differ in appearance, but functions the same as the original part. This part controls the temperature of the inside of the dryer drum and prevents the dryer from overheating.
This idler pulley assembly includes the pulley and bracket, ensuring proper tension on the dryer drive belt for smooth drum rotation. Compatible with several Whirlpool, KitchenAid, Maytag, Jenn-Air, A...
$34.56
In Stock
Questions And Answers for WED5800BC0
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
JAMES
March 1, 2025
All the lights on the panel light up but when i push the start button nothing happens
For model number WED5800BC0
Hi James,
Thank you for your question. If the dryer does not start, we recommend checking the thermal fuse, the door switch, and the belt. Before removing and checking these parts, unplug the dryer from the electrical outlet. When checking the thermal fuse and the door switch, you will need to test them for continuity with a multimeter on the Rx1 setting. When testing the thermal fuse, you should receive a reading of zero or infinity. If you receive any other reading, you will need to replace the thermal fuse. When testing the start switch, place the probes on the switch’s terminals. You should receive a reading of infinity. With the probes still touching the terminals, press in on and hold the switch. The reading should change to zero. If your switch fails either of the tests above, you need a replacement rotary switch. Check the belt to see if it has slipped off the pullies and to see if it is worn or damaged. If it has slipped off reposition it, and if it is damaged, it will need to be replaced. We hope this helps!
My Whirlpool cabrio dryer heating element assembly is remove from front bottom panel dryer
For model number WED5800BC0
Hi Darrell,
Thank you for your question. Yes, the heating element can be accessed by removing the bottom panel from the dryer. We have included a link to a repair video, that you may reference on how to replace it.
We hope this helps! If you have any questions, please let us know.
First I unplugged the dryer, then removed the back panel, this exposed most all of the wiring and I could see the heater coils. Not knowing what the problem was I started looking at the coils and could not see any broken parts. So then checked the thermal fuse for continuity I removed the two wires from it with a small pair of needle nose pliers, it was held in place by two screws, once they were removed the fuse came out easily, I checked continuity with a volt meter placing the meter on X1 Ohms and could not get a reading. I replaced with a new one and put it all back together the way I took it apart. Then I plugged it in and it worked first time, I now have warm dry clothes.
Cleaning the lint out of the whole machine took quite a bit of time--it was everywhere. Underneath the lint trap was a collection that ultimately ruined the thermal fuse where it restricted the air flow considerably.
Ascertaining the problem was the most time consuming part.
The actual repair was quite simple and didn't take but 15-20 minutes.
