The rack track stop on your dishwasher is designed to stop the dish rack at the appropriate place when opening and closing the rack. If your dishwasher is not cleaning your dishes properly, the rack s...
$9.83
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
Sold individually. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward.
$12.80
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
This manufacturer-certified heating element is used to create heat during the dry cycle and increase water temperature during portions of the wash cycle when certain options are selected. If your dish...
$84.35
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
This is a lower spray arm for a dishwasher. The lower spray arm allows water to be spread evenly throughout the dishwasher tub with the proper force so dishes come out clean. This spray arm is gray in...
$77.52
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.20
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
This water inlet valve should be located behind the lower kick plate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.
$81.63
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
This is a replacement middle spray arm in your dishwasher. You will find your middle spray arm mounted on the bottom of the middle dish rack. The upper spray arm rotates and sprays water during the op...
$63.68
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
Order within the next 1 hr and 29 mins and your part ships today!
Questions And Answers for WDF540PADM1
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Linda
September 29, 2023
When I lifted out the filtration system filter to clean it, there is a pool of water that looks old and dirty in the reservoir. It’s a good couple inches deep. Is it normal to have water in there?
For model number WDF540PADM1
Hello Linda, thank you for the question. It is normal for there to be a small amount of standing water in the dishwasher filter area. It will keep the rubber seals from drying. If the water level inside the dishwasher is below the filter, everything is fine. If the water is above the filter, we recommend checking the drain hose, part number PS2358130, to fix the issue. We hope this solves your problem!
Dishwasher is making a whining sound on startup. Sound goes away once cycle begins. Any suggestions?
For model number WDF540PADM1
Hi Alex, thank you for reaching out. If your dishwasher is making a whining or humming sound, it is most likely the pump and motor assembly, part number PS12347645. This sound is normal. However, if there is also an issue with the cleaning of dishes, then you may need to check this part, as it is most likely faulty and may need to be replaced. We hope this information helps!
Hello Robin, thank you for the question. The dimensions of your model are:
Width: 23 7/8 Inches.
Depth: 24 1/2 Inches.
Height: 34 1/2 Inches.
We hope this information is useful!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Caviat: The actual repair is less than 15 minutes, but I spent a lot of time playing with it before I figured out it was that easy and fast. You don't need to remove the dishwasher from the counter to do this. And it will probably help to look at the new part closely so you can understand where the retainer clip is to press it and release the old pump.
First remove the water from the dishwasher pan that would not drain with a wet/dry vac. Otherwise the water will all drain on the floor when you remove the pump. Then remove the two screws on the kickplate on the front of the unit below the door. Remove the kickplate/maintainence access cover. The drain pump is on the right about 8 inches in. Using two hands you grasp the drain pump with your right hand and use the left hand to push the retaining clip down. Then the drain pump will rotate 1/4 turn counterclockwise and can be removed without pulling the dishwasher out. There is likely to be some water leak out that was traped in the pump housing that you can not reach with the vac. Disconnect the wire. Connect the wire to the new pump, put it in place and 1/4 turn clockwise to install it. Replace the kickplate and you're done.
I called an experienced plumber, who balanced and installed my new dishwasher properly, using the brackets I ordered from Parts Select, after an INEXPERIENCED plumber had tossed the factory-provided mounting brackets out with the shipping carton. Relief!