The rack track stop on your dishwasher is designed to stop the dish rack at the appropriate place when opening and closing the rack. If your dishwasher is not cleaning your dishes properly, the rack s...
$13.24
In Stock
Order within the next 10 hrs and your part ships today!
Sold individually. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward.
$18.59
In Stock
Order within the next 10 hrs and your part ships today!
This manufacturer-certified heating element is used to create heat during the dry cycle and increase water temperature during portions of the wash cycle when certain options are selected. If your dish...
$56.68
In Stock
Order within the next 10 hrs and your part ships today!
This drain pump is used in dishwashers to remove water from the dishwasher tub. If the impeller in the dishwasher is damaged or the motor has been shorted out and will not drain, it is possible the bo...
$95.58
In Stock
Order within the next 10 hrs and your part ships today!
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$15.95
In Stock
Order within the next 10 hrs and your part ships today!
This water inlet valve should be located behind the lower kick plate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.
$81.15
In Stock
Order within the next 10 hrs and your part ships today!
This filter works with the water pump in your dishwasher. It prevents debris from entering the pump and causing damage. As a result, the filter can occasionally become clogged or damaged, and will nee...
$58.54
In Stock
Order within the next 10 hrs and your part ships today!
This part acts as as safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches a certain point, this part will shut down power to the heating element.
$35.46
In Stock
Order within the next 10 hrs and your part ships today!
This door latch is designed to secure the dishwasher door and signal the control board when the door is properly closed. If your dishwasher won’t latch or start, the latch may be faulty and should be ...
$46.38
In Stock
Order within the next 10 hrs and your part ships today!
Questions And Answers for WDF520PADM0
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
7 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brad
April 2, 2022
Just installed dishwasher and turned it on and water come from the bottom
Of the door. What is the cause ?
For model number WDF520PADM0
Hello Brad, thank you for your question. We have researched the model you have provided, and we would suggest the gasket, part number PS16221222. If you need help placing an order, our customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Hello Randal, Thank you for your inquiry. You can reset the dishwasher by unplugging it or disconnecting it from the power source for 5 minutes. If it appears to have no lights or does not respond, check to make sure the Control Lock is not activated by pressing and holding 4 hour delay for 3 seconds. The control lock light will stay on if Control Lock is activated. To deactivate it, press and hold the 4 hour delay button for 3 seconds. We hope this helps and if you need a part in the future and need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Ryan
March 19, 2023
Dish washer will drain but won’t start
For model number WDF520PADM0
Hello Ryan, thank you for your question. You may need to Reset. Turn the power off and back on. If that doesn't work, check the manufacturer's instructions for resetting the dishwasher. You may have to press and hold the start button, or unplug the machine for a minute or two. After resetting, you'll be able to start a new wash cycle. We hope this information will help you.
Was this helpful?
Thank you for voting!
Shari
April 23, 2023
The gray plastic housing has cracked. Is there any way to repair it or replace it?
For model number WDF520PADM0
Hi Shari, Thank you for asking. The Console in Stainless/Grey is PartSelect Number PS11757311. Thank you for the inquiry!
When selecting my cycle, I'm trying to select Heat Dry, and it never lights up. The light will come on for the High Temp, but the light under the Heat Dry never comes on. What might my issue be?
For model number WDF520PADM0
Hello Gayle, thank you for the question. We have concluded that the issue is with the control board, part number PS11722932. We hope this is helpful!
Caviat: The actual repair is less than 15 minutes, but I spent a lot of time playing with it before I figured out it was that easy and fast. You don't need to remove the dishwasher from the counter to do this. And it will probably help to look at the new part closely so you can understand where the retainer clip is to press it and release the old pump.
First remove the water from the dishwasher pan that would not drain with a wet/dry vac. Otherwise the water will all drain on the floor when you remove the pump. Then remove the two screws on the kickplate on the front of the unit below the door. Remove the kickplate/maintainence access cover. The drain pump is on the right about 8 inches in. Using two hands you grasp the drain pump with your right hand and use the left hand to push the retaining clip down. Then the drain pump will rotate 1/4 turn counterclockwise and can be removed without pulling the dishwasher out. There is likely to be some water leak out that was traped in the pump housing that you can not reach with the vac. Disconnect the wire. Connect the wire to the new pump, put it in place and 1/4 turn clockwise to install it. Replace the kickplate and you're done.
I called an experienced plumber, who balanced and installed my new dishwasher properly, using the brackets I ordered from Parts Select, after an INEXPERIENCED plumber had tossed the factory-provided mounting brackets out with the shipping carton. Relief!
