The rack track stop on your dishwasher is designed to stop the dish rack at the appropriate place when opening and closing the rack. If your dishwasher is not cleaning your dishes properly, the rack s...
Sold individually. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward.
This manufacturer-certified heating element is used to create heat during the dry cycle and increase water temperature during portions of the wash cycle when certain options are selected. If your dish...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This water inlet valve should be located behind the lower kick plate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.
This filter works with the water pump in your dishwasher. It prevents debris from entering the pump and causing damage. As a result, the filter can occasionally become clogged or damaged, and will nee...
This part acts as as safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches a certain point, this part will shut down power to the heating element.
This part is used to hold the access panel in place. Sold individually.
$9.45
In Stock
Questions And Answers for WDF510PAYSA
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
SHIRLEY
February 6, 2020
I bought a house that has this dishwasher and i am trying to find out how old it is. It is model #wdf510paysa, ser#f40776477, type #583-0, can you help?
For model number WDF510PAYSA
Hello, Thank you for your question. Here is what I was able to find: According to the serial number this product may have been manufactured in Findlay, OH, February of 1974 or 1984 or 2014. Thank you for your inquiry.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Alysia
August 31, 2023
Trying to see how old my dishwasher is Serial number F41690219
For model number WDF510PAYSA
Hi Alysia, thank you for getting in touch. According to our research, your model was manufactured in April 2014. Glad to be of help!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Roy
August 31, 2023
Dishwasher doesn’t finish complete cycle.
Panel lights flash
Press start and continues but stops
Press start again and continues
For model number WDF510PAYSA
Hello Roy, thank you for reaching out. Based on the description that you have provided, we would recommend checking the control board, part number PS11722936, to fix the issue. We hope this solves your problem!
I have this dishwasher WDF510PAYSA, but it won’t dry the dishes. Can you advise what may be needed? Also, can you advise if I need to replace a new washer then what size should this be?
For model number WDF510PAYSA
Hello Calvin, thank you for your question. The part that does the drying is the Dishwasher Heating Element PS8260087. Good luck with this repair.
Caviat: The actual repair is less than 15 minutes, but I spent a lot of time playing with it before I figured out it was that easy and fast. You don't need to remove the dishwasher from the counter to do this. And it will probably help to look at the new part closely so you can understand where the retainer clip is to press it and release the old pump.
First remove the water from the dishwasher pan that would not drain with a wet/dry vac. Otherwise the water will all drain on the floor when you remove the pump. Then remove the two screws on the kickplate on the front of the unit below the door. Remove the kickplate/maintainence access cover. The drain pump is on the right about 8 inches in. Using two hands you grasp the drain pump with your right hand and use the left hand to push the retaining clip down. Then the drain pump will rotate 1/4 turn counterclockwise and can be removed without pulling the dishwasher out. There is likely to be some water leak out that was traped in the pump housing that you can not reach with the vac. Disconnect the wire. Connect the wire to the new pump, put it in place and 1/4 turn clockwise to install it. Replace the kickplate and you're done.
I called an experienced plumber, who balanced and installed my new dishwasher properly, using the brackets I ordered from Parts Select, after an INEXPERIENCED plumber had tossed the factory-provided mounting brackets out with the shipping carton. Relief!