The rack track stop on your dishwasher is designed to stop the dish rack at the appropriate place when opening and closing the rack. If your dishwasher is not cleaning your dishes properly, the rack s...
$13.24
In Stock
Order within the next 5 hrs and your part ships today!
Sold individually. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward.
$18.59
In Stock
Order within the next 5 hrs and your part ships today!
This manufacturer-certified heating element is used to create heat during the dry cycle and increase water temperature during portions of the wash cycle when certain options are selected. If your dish...
$56.68
In Stock
Order within the next 5 hrs and your part ships today!
This drain pump is used in dishwashers to remove water from the dishwasher tub. If the impeller in the dishwasher is damaged or the motor has been shorted out and will not drain, it is possible the bo...
$95.58
In Stock
Order within the next 5 hrs and your part ships today!
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$15.95
In Stock
Order within the next 5 hrs and your part ships today!
This water inlet valve should be located behind the lower kick plate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.
$81.15
In Stock
Order within the next 5 hrs and your part ships today!
This filter works with the water pump in your dishwasher. It prevents debris from entering the pump and causing damage. As a result, the filter can occasionally become clogged or damaged, and will nee...
$58.54
In Stock
Order within the next 5 hrs and your part ships today!
This part acts as as safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches a certain point, this part will shut down power to the heating element.
$35.46
In Stock
Order within the next 5 hrs and your part ships today!
Questions And Answers for WDF510PAYS6
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Darryl
February 26, 2023
Will PartSelect #: PS8260087 heating element work with model number WDF510PAYS6 ?
For model number WDF510PAYS6
Hello Darryl, Thank you for your inquiry. We have researched the model number you have provided and confirm that this part will fit your model. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Ed
August 2, 2021
What year is this model
For model number WDF510PAYS6
Hi Ed,
Thank you for your question. To verify the age of your refrigerator, look on the label where you found the model number and either in the upper left or right corner or just under the serial number, you will find the month and year (MM/YY) that it was manufactured. If you are unable to find it, please resubmit your question with both your model and serial numbers and we would be happy to check on this for you. We hope this helps! If you have any questions, please let us know.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Amy
January 11, 2025
Gray circle rubber piece came off of dishwasher and we’re not sure where it came off and dishwasher leak last night from bottom
For model number WDF510PAYS6
Hello Amy, Thank you for contacting us. It could be a pump inlet grommet part# PS11756098 or the water inlet valve gasket part# PS11746138. If it is not one of these two parts, then it may be part of the circulation pump or drain pump and not available separately. We hope this helps.
My dishwasher keeps running on wash cycle, I have to cancel in order to get it to stop washing
For model number WDF510PAYS6
Hi Sheryl,
Thank you for your question. If your dishwasher is stuck on one cycle, we would recommend checking the heating element, the thermostat, and the electronic control board. We hope this helps!
Hello, My dishwasher recently always has standing water at the bottom after the cycle. I can drain it manually by pushing the "drain" button. It used to be drained automatically by itself after one cycle. Is this a sign of some kind of defect?
Today, I cleaned the filter, screen and also checked the water pump. Everything seems fine, and I did a test after that. It still has standing water, so I have to drain it by pushing the button. Can you tell me where it could be the problem. Thank you very much in advance.
For model number WDF510PAYS6
Hi Shawn,
Thank you for your question. It is normal for at least a cup of water to remain at the bottom of the dishwasher. This water helps keep the seals and gaskets in that area from drying out. The water is removed and replaced after each cycle. If there is more than a cup of water left at the bottom of the dishwasher after a cycle, then you should check the drain pump and drain hose for any obstructions. We hope this helps!
Caviat: The actual repair is less than 15 minutes, but I spent a lot of time playing with it before I figured out it was that easy and fast. You don't need to remove the dishwasher from the counter to do this. And it will probably help to look at the new part closely so you can understand where the retainer clip is to press it and release the old pump.
First remove the water from the dishwasher pan that would not drain with a wet/dry vac. Otherwise the water will all drain on the floor when you remove the pump. Then remove the two screws on the kickplate on the front of the unit below the door. Remove the kickplate/maintainence access cover. The drain pump is on the right about 8 inches in. Using two hands you grasp the drain pump with your right hand and use the left hand to push the retaining clip down. Then the drain pump will rotate 1/4 turn counterclockwise and can be removed without pulling the dishwasher out. There is likely to be some water leak out that was traped in the pump housing that you can not reach with the vac. Disconnect the wire. Connect the wire to the new pump, put it in place and 1/4 turn clockwise to install it. Replace the kickplate and you're done.
Worked the new gasket into the groove with a smooth screwdriver and my fingers. No leaks and it stays in place. Parts Select had the right part and I got it fast
