WAT28400UC (20) Bosch Washer - Overview
Sections of the WAT28400UC
[Viewing 5 of 5]Keep searches simple, eg. "belt" or "pump".
BOOT GASKET
PartSelect #: PS18375896
Manufacturer #: 20007273
This washing machine door boot gasket creates a watertight seal between the drum and the door opening, preventing leaks during operation. Made from suds-resistant EPDM rubber in a silver-grey finish, ...
$134.54
In Stock
PUMP-DRAIN
PartSelect #: PS11704552
Manufacturer #: 00145753
If your washer isn’t draining or you’re hearing strange noises during the cycle, this drain pump might be the fix. It’s the part that pushes water out of the drum so your laundry doesn’t sit in a pudd...
$235.00
In Stock
VALVE-MAGNET
PartSelect #: PS11724591
Manufacturer #: 00635399
This magnetic valve controls water flow within your appliance, ensuring proper operation during cycles. Built for precision and reliability, it restores performance when the original valve fails. Inst...
$219.69
In Stock
FILTER-FLUFF
PartSelect #: PS11704964
Manufacturer #: 00647920
This washer drain pump filter, also called a fluff filter or coin trap, is designed to capture lint, small debris, and stray items before they reach the drain pump, protecting the system from clogs an...
$49.13
In Stock
SHOCK ABSORBER
PartSelect #: PS17243822
Manufacturer #: 11051551
This washing machine shock absorber is a genuine OEM component designed to reduce vibrations and stabilize the drum during spin cycles, ensuring smooth and quiet operation. By cushioning the tub’s mov...
$88.43
In Stock
Questions And Answers for WAT28400UC
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the WAT28400UC
[Viewing 2 of 2]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Agitator paddle came loose
I read another review that they had trouble fitting the part. The only "trick" I found is that as the drum is obviously round, you really have to have all the fastening hooks front and back of the replacement part exactly lined up with the receptacle slots on the drum. Perhaps not as easy as it sounds as the metal is polished and the plastic easily slides a millimeter either way and away from the slots. And I also pushed down front and back on the part as I slid the whole thing forward into position. I was rewarded with a very satisfying click as it locked into place. Took three or four attempts but it fits and stays and is an exact replacement even if the numbers embossed on the part are different to the part which broke loose. Part arrived on a Saturday, less than 48 hours from my order. I have another spare for future needs as plastic agitator paddles clearly take a beating over several years.
Parts Used:
-
Nicholas from WOODSTOCK, NY
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:Less than 15 mins
1 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!