This surface igniter provides reliable ignition by generating the heat needed to light the burner safely and efficiently. Proper ignition improves cooking performance and safety. Replacing a worn igni...
$32.34
In Stock
Order within the next 6 hrs and your part ships today!
Having trouble with your Whirlpool cooktop? Don't worry ? we've got just the cure for you ? the powerful Whirlpool REGULATOR. Designed to help your cooktop operate at its peak, this part ensures an ef...
$238.99
In Stock
Order within the next 6 hrs and your part ships today!
This part is the replacement grommet for your cooktop or range. It is made of black plastic and is approximately 1 ¼ inches in diameter. This part may also be known as the cooktop burner knob gasket, ...
$12.06
In Stock
Order within the next 6 hrs and your part ships today!
This canning element is typically used for Whirlpool/Kenmore brand electric ranges. This element has a 3/4 raised frame for additional support, 5 turns, and carries 2600 watts. It also comes with an infinite switch.
Are you experiencing uneven flames with your range? The Whirlpool Right Front Surface Burner Head is the solution you need. This is a genuine Whirlpool part that's been meticulously designed to make y...
$80.91
In Stock
Order within the next 6 hrs and your part ships today!
My husband and I replaced the igniter module, following directions we found online. We removed the old one, replaced it with the new one, and thankfully everything is working great!
I went online and discovered the repair method and schematic of the range. I removed the spark module after first removing the upper rear panel cover and replaced with the new part module ordered from your company and now the spark module operates all the gas elements when they are turned on thus lighting the gas burners. My mother in law was thrilled, as she had been using matches and burning her finger tips,since the original range part malfunctioned. The only problem was the small screw from the original installation was not long enough , so it required some changes to get it affixed to the cabinet side.Thanks for the reasonable price and the right part for the job!!
Removed back upper cover, unscrewed retaining screw from module. As noted in a comment from another do-it-yourselfer, I replaced screw with a longer one and reinstalled module. Note that the replacement part is not exactly the same as the old one(the wires are located differently), I noted the wire color codes with the slot number and reinstalled them in the same slot number. Works fine.
