UVL6036JSS1 Whirlpool Range - Overview
Sections of the UVL6036JSS1
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Grease Filter
PartSelect #: PS2372036
Manufacturer #: W10169961A
Sold individually. This metallic vent hood filter collects grease particles in the air from cooking.
$52.19
In Stock
Order within the next 8 hrs and your part ships today!
Range Hood Control Panel
PartSelect #: PS12728687
Manufacturer #: W11387938
The Control panel houses the selection buttons for the range hood.
$167.66
In Stock
Order within the next 8 hrs and your part ships today!
SWTCH-SLDE
PartSelect #: PS16660546
Manufacturer #: W11569415
This range hood slide switch is designed to control key functions such as fan speed or lighting through a smooth, easy-to-use sliding mechanism. Installed behind the control panel, it allows users to ...
$38.60
In Stock
Order within the next 8 hrs and your part ships today!
Control Slide Switch
PartSelect #: PS16875964
Manufacturer #: W11662407
This control slide switch allows users to manually adjust or activate specific appliance functions through a simple sliding motion. It provides reliable mechanical input to the control system and is o...
$48.68
In Stock
Order within the next 8 hrs and your part ships today!
Switch
PartSelect #: PS11731241
Manufacturer #: W10853393
Unveiling the Whirlpool SWTCH-RCKR Fan Control Switch ? a vital replacement part for your range hood. This genuine OEM component sparks life into your fan motor, allowing it to whisk away smoke and wa...
$137.45
In Stock
Order within the next 8 hrs and your part ships today!
SELF BALLASTED LED GU10 3000K SILVER
PartSelect #: PS12728694
Manufacturer #: W11388881
$104.43
In Stock
Order within the next 8 hrs and your part ships today!
Socket
PartSelect #: PS11753878
Manufacturer #: WPW10370558
$79.48
In Stock
Order within the next 8 hrs and your part ships today!
Rocker Switch
PartSelect #: PS12348906
Manufacturer #: W11193832
$136.35
In Stock
Order within the next 8 hrs and your part ships today!
Damper
PartSelect #: PS16690484
Manufacturer #: W11551389
$116.55
In Stock
Order within the next 8 hrs and your part ships today!
Questions And Answers for UVL6036JSS1
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Old grease filters were coming apart due to two tiny lost screws which had popped out. Tried to replace them at ACE Hardware and found nothing that tiny! Therefore just ordered replacement grease fikterd.
The only poroblem I had was finding the Model number. I entered WWW….instead of WVW (my eyesight and error??.Receiving the new filters was prompt! THANK YOU!
Parts Used:
-
Anneliese from Sarasota, FL
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
4 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
one switch went out on the range hood controlling the lights.
The repair did not happen. Parts select sent me the wrong part. They sent a cover plate without any switches.
I;m still waiting for the correct part.!!!!!!!!!!!!!!!!!!!!!!
I;m still waiting for the correct part.!!!!!!!!!!!!!!!!!!!!!!
Parts Used:
-
Jeffrey from MILTON, FL
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
SWITCH CONTROL UNIT HAD BROKEN OFF FROM ONE END OF ITS INTERIOR MOUNTING
Removed and cleaned to overhead grease trap filters which required a sink full of detergent some wire wool pads and and much elbow grease. This is probably a service task that should be performed at least annually for hoods in frequent use. And be careful not to cut your fingers on some of the sharp interior edges.
With the grease filters removed it was then possible to access the switch unit from the inside of the hood. Used a small Phillips screwdriver to loosen and remove the two fastening screws and removed and replaces the whole unit.
Refitting was the reverse of the above process.
With the grease filters removed it was then possible to access the switch unit from the inside of the hood. Used a small Phillips screwdriver to loosen and remove the two fastening screws and removed and replaces the whole unit.
Refitting was the reverse of the above process.
Parts Used:
-
NICHOLAS & LEIGH from CHARLOTTE, NC
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!