UE10D33 LG Air Conditioner - Overview
Models starting with UE10D33
Click on the best match to narrow your results.
- UE10D33 LG Air Conditioner (LG Air Conditioner Model UE10D33 Parts)
- UE10D33 (AWYBFRD) LG Air Conditioner (Residential Hvac)
- UE10D33B (ASWBFRD) LG Air Conditioner (Residential Hvac)
- UE10D33B LG Air Conditioner (LG Air Conditioner Model UE10D33B Parts)
- UE10D33C LG Air Conditioner (LG Air Conditioner Model UE10D33C Parts)
- UE10D33C (ASWAFRD) LG Air Conditioner (Hvac)
- UE10D33D LG Air Conditioner (LG Air Conditioner Model UE10D33D Parts)
- UE10D33D (ASWAFRD) LG Air Conditioner (Hvac)
Keep searches simple, eg. "belt" or "pump".
Clamp,Spring
PartSelect #: PS3522762
Manufacturer #: 3H02932B
The fan blade clamp, also known as a clamp spring, are for air conditioners. The clamp supports the fan blade on the motor shaft. When the motor is running, it signals the shaft to turn and rotate, bu...
$10.29
Special Order
Room Air Conditioner Fan Bracket
PartSelect #: PS3524525
Manufacturer #: 4960A20005A
$47.57
Special Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken fan axial blade
Unscrewed the unit from the exterior case pulled out the unit unscrewed the 4 screw that hold the fan shroud carefully unscrewed the coil pulled back unclipped the axial fan clip gentlyhit with rubber mallet replacement of new fan replaced clip
15 minutes best investment of 20 bucks as apposed to 400 $
15 minutes best investment of 20 bucks as apposed to 400 $
Parts Used:
-
John from HARLINGEN, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
8 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Motor mount broke due to imbalance caused by mud dobber nests.
Pulled PTAC out of wall sleeve, unhook wire harness from control area, remove condenser shroud and motor and fan blade all at the same time. Replaced motor bracket and re-installed in reverse order.
Parts Used:
-
Travis from LOUISVILLE, IL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Capacitor went out
-
Al from CROSS PLAINS, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
2 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!