T1789EFHKD (ABWEEUS) LG Washer - Overview
Sections of the T1789EFHKD
[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
Pulsator Cap
PartSelect #: PS3525704
Manufacturer #: 5006EA3009B
This part is known as a pulsator cap or washplate cap, and is designed for your LG washer. It fits over the washplate mounting bolt and prevents clothes from getting caught on the washplate during a w...
$56.87
In Stock
BELLOWS ASSEMBLY
PartSelect #: PS12738715
Manufacturer #: AAS73229402
Maintain a watertight seal and prevent leaks with this genuine bellows assembly, designed for LG front-load washers. Also known as a door boot bellow or tub-to-pump hose, this flexible rubber gasket c...
$65.61
In Stock
Screw
PartSelect #: PS3534421
Manufacturer #: FAB30598601
Got an LG washer that needs a fix? We have the perfect solution for you! Here is our bespoke screw, made just for LG washing machines. It's crafted to meet safety and efficiency standards, ensuring a ...
$26.22
In Stock
Coupling
PartSelect #: PS3534815
Manufacturer #: MCJ61861201
Discover how you can keep your LG washer running like a breeze with our authentic LG Washer Shifter Coupling. This key component enables your washer to transition from agitation to spin cycle smoothly...
$51.43
On Order
Drain Pump Assembly
PartSelect #: PS12748410
Manufacturer #: AHA75673404
This drain pump assembly is responsible for removing water from your washer during the drain cycle. It is typically at the bottom of the washing machine and connected to the drain hose. If it is damag...
$157.54
In Stock
Switch
PartSelect #: PS8751171
Manufacturer #: EBF61674802
This part is the replacement switch assembly for your top-load washer. It contains the switch mechanism and the connecting wire that hooks the door latch to the electrical system of the washer. The li...
$186.67
In Stock
MOTOR ASSEMBLY,DC,CLUTCH
PartSelect #: PS12589800
Manufacturer #: EAU64283201
Keep your washer running smoothly with this clutch motor assembly. It helps the drum switch between washing and spinning so clothes get clean and water is removed efficiently. If your washer won’t spi...
$118.06
In Stock
Cap,Softener
PartSelect #: PS3534726
Manufacturer #: MBL62061501
This part is the replacement fabric softener cap for your washer. It is also known as the washer dispenser drawer insert. It is made of blue plastic and is approximately 4 1/4 inches by 2 1/4 inches. ...
$49.47
In Stock
Questions And Answers for T1789EFHKD
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the T1789EFHKD
[Viewing 9 of 9]Will not agitate
Fixed by
these parts
these parts
Show All
Will not drain
Fixed by
these parts
these parts
Show All
Spinning Issues
Fixed by
these parts
these parts
Show All
Does not dispense fabric softener or detergent
Fixed by
these parts
these parts
Show All
Lid or door won’t close
Fixed by
these parts
these parts
Show All
Draining Issues
Fixed by
these parts
these parts
Show All
Locking Issues
Fixed by
these parts
these parts
Show All
Marks left on clothes
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
leg broke off inside housing
raised the front of washer by hand (literally) and placed two 2x4 blocks under front lip for support. reached up inside washer cabinet and unscrewed the broken leg piece upwards into the cabinet. this was the only way I could get the broken piece out without some specialized tool to reach it from the underside. replacement with the new leg was a breeze.
Parts Used:
-
thomas m from CARMICHAEL, CA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:Less than 15 mins
5 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Detergent and Softner dispenser was not working peoperly
The old dispenser is removed by slightly raising the front as you pull it out of the housing slot. To install the new dispenser, keep the front slightly tilted up and insert the new dispenser into the housing alot
Parts Used:
-
Roger from Bradenton, FL
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
3 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!