This wheel for the lower rack of your dishwasher, it includes the brushing you will need for installation; the axel is not included. You need to line the replacement wheel up with the axel, slide it i...
If your dishwasher isn’t cleaning well, won’t start, or is leaking, this heat pump assembly could be the fix. It’s designed to fit select Bosch, Thermador, and Gaggenau models and helps circulate and ...
$216.29
In Stock
Order within the next 8 hrs and your part ships today!
This part is a replacement tine row clip for your dishwasher. The tine row clip is adjustable, and it fits onto your dishrack to holds the tines into place. If your dishrack tine rows will not stay in...
$9.77
In Stock
Order within the next 8 hrs and your part ships today!
This drain pump is designed for use in various dishwasher models and is responsible for efficiently removing water at the end of each cycle. It directs the water through the drain hose, which connects...
$69.01
In Stock
Order within the next 8 hrs and your part ships today!
This replacement micro filter is designed to trap small food particles and debris during the wash and rinse cycles, helping to maintain optimal cleaning performance in your dishwasher. Positioned with...
$60.96
In Stock
Order within the next 8 hrs and your part ships today!
If you’re seeing water puddles near your dishwasher or noticing louder wash cycles, the bottom door seal might be worn out. This part keeps water and steam inside during a wash and helps your dishwash...
$42.44
In Stock
Order within the next 8 hrs and your part ships today!
Keep your dishwasher or refrigerator draining properly with this replacement drain hose. It helps move used water out of the appliance and into your home’s plumbing system, preventing puddles and left...
$30.44
In Stock
Order within the next 8 hrs and your part ships today!
If your dishwasher is leaking or not draining properly, this replacement drain hose might be the fix. It connects the dishwasher to your sink drain or garbage disposal, carrying away dirty water after...
$47.97
In Stock
Order within the next 8 hrs and your part ships today!
Having trouble with your dishwasher? Let's help you solve that with the Bosch Dishrack Tine Row Holder. This is an original, high-quality part that helps your dishwasher work at full efficiency by sec...
$8.51
In Stock
Order within the next 8 hrs and your part ships today!
Questions And Answers for SHXM4AY55N
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
BOB
October 17, 2023
Dishwasher won't drain. I have replaced the pump and the insert is installed by the filter.
Code E24.
For model number SHXM4AY55N
Hi Bob, thank you for the question. The error code E24 means that the dishwasher is not draining properly. The issue is usually caused by a clogged filter. However, if the issue persists after replacing the drain pump, the drain hose and the filter are most likely causing the issue. First, perform a hard reset by disconnecting the power to the dishwasher for five minutes. If the issue persists, take the filter out of the dishwasher and clean it with warm soapy water. Remove the drain pump cover down inside the sump to check for debris hitting the pump impeller. Reinstall the cover and try the dishwasher again. If it still will not drain, then your drain hose is clogged. You will need to uninstall the dishwasher, disconnect the hose, and blow through it to make sure it is clear. If the water is draining and it stills shows E24 error code, we would recommend checking the turbidity sensor, part number PS8727345. We hope this information helps!
THE DISHWASH HASNT WORKED RIGHT. START BUTTON BROKE. NEVER WORKED CORRECTLY
For model number SHXM4AY55N
Hi Kathy, thank you for your question! You will need to replace the push button cap, part number PS8729135, and control board, part number PS11732398. We hope this information is useful!
GETTING ERROR CODE E28 TRY ALL TROUBLE SHUT , BREKER, RESET, ECT CAN YOU HELP ERROR CODE …BOSCH DISHWASHER
For model number SHXM4AY55N
Hello Paul, thank you for your inquiry. According to our research, the error code indicates an issue with the turbidity sensor. You may need to replace the turbidity sensor, part number PS8727345, to fix the issue. It detects soil level in the water and sends the information to the control board. Glad to be of assistance!
I lost the screws and the insulation foam for putting the lower cover on this thing. Just above the floor. Hoping I can order spares!
For model number SHXM4AY55N
Hi Michael, thank you for reaching out. The insulating part you are looking for is part number PS8731477, and the access panel screws are part number PS8726114. These are sold individually. We hope that helps!
replacing the sensor was simple, just unplug and turn it out, but didn't solve the problem, it's a float sensor that doesn't show up on the tech sheet in the dishwasher or anywhere in troubleshooting on the internet I could find.
Remove the dishwasher from under the counter. Remove door springs. On the inside of the lip of the door remove the 6 screws that hold the outer door panel on, and remove panel. this will expose hinge screws. Remove the two screws per side holding the inner door to the hinge assembly. Take pictures of the way the gasket's grey plastic end cap assembles between the inner door frame and the hinge, and remove the inner door. The old gasket has a channel lip that sits on the plastic edge of the washer tub, pull it off this lip and discard. Install new gasket and put it all back together! Use this opportunity to clean the gunk out of the upper door seals.
I watch utube to assess the problem then took eveything apart and saw the build up on the filter, which i had never cleaned. I tried to clean it but was unsuccessful so order the filter from partselect and it came within a couple of days, installed very easily and began to clean as it always had.
