This is a replacement dishrack roller or wheel for your dishwasher. It is made of gray plastic, measures a little over an inch in diameter, and is sold individually. This roller is designed for the lo...
$20.08
In Stock
Order within the next 5 hrs and your part ships today!
This replacement micro filter is designed to trap small food particles and debris during the wash and rinse cycles, helping to maintain optimal cleaning performance in your dishwasher. Positioned with...
$60.96
In Stock
Order within the next 5 hrs and your part ships today!
If you’re seeing water puddles near your dishwasher or noticing louder wash cycles, the bottom door seal might be worn out. This part keeps water and steam inside during a wash and helps your dishwash...
$42.44
In Stock
Order within the next 5 hrs and your part ships today!
Keep your dishwasher or refrigerator draining properly with this replacement drain hose. It helps move used water out of the appliance and into your home’s plumbing system, preventing puddles and left...
$30.44
In Stock
Order within the next 5 hrs and your part ships today!
If your dishwasher is leaking or not draining properly, this replacement drain hose might be the fix. It connects the dishwasher to your sink drain or garbage disposal, carrying away dirty water after...
$47.97
In Stock
Order within the next 5 hrs and your part ships today!
Ensure your dishwasher fills correctly with this replacement water inlet valve. It regulates water flow into the appliance, helping maintain efficient cleaning performance. If your dishwasher isn’t fi...
$88.43
In Stock
Order within the next 5 hrs and your part ships today!
Having trouble with your dishwasher? Let's help you solve that with the Bosch Dishrack Tine Row Holder. This is an original, high-quality part that helps your dishwasher work at full efficiency by sec...
$8.51
In Stock
Order within the next 5 hrs and your part ships today!
If your dishwasher won’t start or keeps stopping mid-cycle, the door latch might be the issue. This replacement part locks the door securely so the machine can run safely and without leaks. It’s easy ...
$45.03
In Stock
Order within the next 5 hrs and your part ships today!
If your dishwasher isn’t draining properly, this drain pump cover might be the part you need. It helps guide water from the bottom of the dishwasher to the drain pump so everything flows smoothly. Mad...
$33.15
On Order
Questions And Answers for SHX4ATF5UC
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jack
February 18, 2020
Water keeps coming in the side of the machine in dry mode causing pump to keep coming on
For model number SHX4ATF5UC
Hi Jack,
Thank you for your question. If water is leaking into the dishwasher, there are some parts that you will need to check to see which one is causing the issue. You will need to check the water inlet valve, the door seal, the drain hoses and the hose clamps. We hope this helps. Thank you and have a great day.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
replacing the sensor was simple, just unplug and turn it out, but didn't solve the problem, it's a float sensor that doesn't show up on the tech sheet in the dishwasher or anywhere in troubleshooting on the internet I could find.
Remove the dishwasher from under the counter. Remove door springs. On the inside of the lip of the door remove the 6 screws that hold the outer door panel on, and remove panel. this will expose hinge screws. Remove the two screws per side holding the inner door to the hinge assembly. Take pictures of the way the gasket's grey plastic end cap assembles between the inner door frame and the hinge, and remove the inner door. The old gasket has a channel lip that sits on the plastic edge of the washer tub, pull it off this lip and discard. Install new gasket and put it all back together! Use this opportunity to clean the gunk out of the upper door seals.
