SHX4AT55UC (21) Bosch Dishwasher - Overview

Sections of the SHX4AT55UC

[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Dishrack Roller - Grey – Part Number: 00611475
Dishrack Roller - Grey
★★★★★
★★★★★
(37)
PartSelect #: PS8727387
Manufacturer #: 00611475
This is a replacement dishrack roller or wheel for your dishwasher. It is made of gray plastic, measures a little over an inch in diameter, and is sold individually. This roller is designed for the lo...
$20.08
  In Stock
Drain Pump - 55Hz – Part Number: 00611332
Drain Pump - 55Hz
★★★★★
★★★★★
(52)
PartSelect #: PS8727352
Manufacturer #: 00611332
The pump ejects the water from the dishwasher through the drain hose.
$91.62
  In Stock
Dishwasher Handlecap Shaped – Part Number: 00628998
Dishwasher Handlecap Shaped
★★★★★
★★★★★
(15)
PartSelect #: PS8729301
Manufacturer #: 00628998
$14.17
  In Stock
FILTER-MICRO – Part Number: 00645038
FILTER-MICRO
★★★★★
★★★★★
(22)
PartSelect #: PS8730270
Manufacturer #: 00645038
This replacement micro filter is designed to trap small food particles and debris during the wash and rinse cycles, helping to maintain optimal cleaning performance in your dishwasher. Positioned with...
$60.96
  In Stock
SEAL-DOOR – Part Number: 00669221
SEAL-DOOR
★★★★★
★★★★★
(20)
PartSelect #: PS8733125
Manufacturer #: 00669221
If you’re seeing water puddles near your dishwasher or noticing louder wash cycles, the bottom door seal might be worn out. This part keeps water and steam inside during a wash and helps your dishwash...
$42.44
  In Stock
Dishwasher Door Cable – Part Number: 00610087
Dishwasher Door Cable
★★★★★
★★★★★
(10)
PartSelect #: PS8727128
Manufacturer #: 00610087
This door cable is for dishwashers. Door cable helps balance and support the weight of the door as it opens and closes.
$18.15
  In Stock
Sump Drain Hose – Part Number: 00645149
Sump Drain Hose
★★★★★
★★★★★
(15)
PartSelect #: PS8730294
Manufacturer #: 00645149
Keep your dishwasher or refrigerator draining properly with this replacement drain hose. It helps move used water out of the appliance and into your home’s plumbing system, preventing puddles and left...
$30.44
  In Stock
HOSE-DRAIN – Part Number: 00668108
HOSE-DRAIN
★★★★★
★★★★★
(12)
PartSelect #: PS8732952
Manufacturer #: 00668108
If your dishwasher is leaking or not draining properly, this replacement drain hose might be the fix. It connects the dishwasher to your sink drain or garbage disposal, carrying away dirty water after...
$47.97
  In Stock
Dishwasher Water Inlet Valve – Part Number: 00633970
Dishwasher Water Inlet Valve
★★★★★
★★★★★
(20)
PartSelect #: PS11700720
Manufacturer #: 00633970
Ensure your dishwasher fills correctly with this replacement water inlet valve. It regulates water flow into the appliance, helping maintain efficient cleaning performance. If your dishwasher isn’t fi...
$88.43
  In Stock
HOLDER – Part Number: 00616990
HOLDER
★★★★★
★★★★★
(2)
PartSelect #: PS8728043
Manufacturer #: 00616990
Having trouble with your dishwasher? Let's help you solve that with the Bosch Dishrack Tine Row Holder. This is an original, high-quality part that helps your dishwasher work at full efficiency by sec...
$8.51
  In Stock
LOCK – Part Number: 10028963
LOCK
★★★★★
★★★★★
(16)
PartSelect #: PS17243681
Manufacturer #: 10028963
If your dishwasher won’t start or keeps stopping mid-cycle, the door latch might be the issue. This replacement part locks the door securely so the machine can run safely and without leaks. It’s easy ...
$45.03
  In Stock
LID – Part Number: 00611322
LID
★★★★★
★★★★★
(7)
PartSelect #: PS8727344
Manufacturer #: 00611322
If your dishwasher isn’t draining properly, this drain pump cover might be the part you need. It helps guide water from the bottom of the dishwasher to the drain pump so everything flows smoothly. Mad...
$33.15
  On Order

Questions And Answers for SHX4AT55UC

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the SHX4AT55UC

[Viewing 9 of 9]
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Not draining
Fixed by
these parts
Fixing Fixing Fixing
Show All
Not cleaning dishes properly
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door latch failure
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not dispense detergent
Fixed by
these parts
Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Noisy
Fixed by
these parts
Fixing
Show All
Will not fill with water
Fixed by
these parts
Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
rollers broke
pushed with thumb pressure and snapped rollers into place.....EASY
Parts Used:
Dishrack Roller - Grey
  • Dennis from PLEASANTVILLE, NJ
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
15 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dishwasher not draining, dishes dirty
replacing the sensor was simple, just unplug and turn it out, but didn't solve the problem, it's a float sensor that doesn't show up on the tech sheet in the dishwasher or anywhere in troubleshooting on the internet I could find.
Parts Used:
SENSOR
  • Daniel from AUBURN, IN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
9 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher was pouring water during the rinse cycle. put the machine up on milk crates to find the source of the leak. The water was coming from the bottom corner of the door. Fount the orig gasket torn
Remove the dishwasher from under the counter. Remove door springs. On the inside of the lip of the door remove the 6 screws that hold the outer door panel on, and remove panel. this will expose hinge screws. Remove the two screws per side holding the inner door to the hinge assembly. Take pictures of the way the gasket's grey plastic end cap assembles between the inner door frame and the hinge, and remove the inner door. The old gasket has a channel lip that sits on the plastic edge of the washer tub, pull it off this lip and discard. Install new gasket and put it all back together! Use this opportunity to clean the gunk out of the upper door seals.
Parts Used:
SEAL-DOOR
  • Harper from Charleston WV, WV
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
7 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!