Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jerry
October 14, 2022
Dishwasher stops approximately 10 min. into cycle. Leaves water and soap in tub. We had to push cancel to dump buttons to dump water. Did not finish cycles. Would this be problem with control unit # 00489004?
For model number SHX33A05UC-14 (FD8211)
Hello Jerry, thank you for reaching out. We have researched your model and found that the issue is probably with the drain pump, part number PS8697211. We would also recommend checking the check valve, part number PS8697043, if it works properly. If you require assistance placing an order, please contact customer service. We hope that helps!
I push the on button and pump keeps running non stop what such I do
For model number SHX33A05UC-14 (FD8211)
Hello Joe, thank you for your inquiry. Based on the description that you have provided, we would recommend checking the main control board, part number PS8722052, to fix the issue. We hope this solves your problem!
hello! my dishwasher is stuck at draining the water in it. the pump drains because I've put water and it pumps. any idea what can it be? thanks!
For model number SHX33A05UC-14 (FD8211)
Hello Marc, thank you for your inquiry. Based on our understanding of the issue, we would suggest checking the main control board, part number PS8722052, to solve the problem. Glad to be of assistance!
With the help of You Tube, this 50 year old Mom got the job done. Not that complicated if you watch the step by step instructions on the Appliance Pro video. My repairman and husband were both determined to just buy a new one but this 20 year old dishwashing genius was just in need of a little repair. Only need a screwdriver, and slightly confusing as wires hook on a little different on new pumps. I suggest watching video the whole way through and then playing it step by step as you do the repair. Worked great for me. Thanks.
I used a wet vac to remove the water from the dishwasher. remove cover and filter/strainer from bottom of dishwasher. remove screw which allows you to lift the plastic piece to access check valve. Original check valve looked like new , I installed new check valve re installed parts . Job done and issue resolved .
To perform the repair, the door panel must be removed (8 Torx screws) and the door removed from the hinges in order to access the lower door seal. For this model Bosch and other similar models, the hinge springs must then be disengaged (safer) or kept from retracting. To disengage the springs requires removing the entire unit, disconnecting the water supply, and flipping it on its side to disengage the springs. I chose the latter, keeping the unit in place, holding the hinges with vice-grips on either side, then removing the door. This was not easy and caution is required. Either method is risky with a 20-year dishwasher. The replacement part does not fit as well as the original (much sturdier) part, but appears to seal well for now. Repair videos on the internet are for different, newer models where disabling the hinges as described here is not required, making the repair much easier. Recommend looking carefully at your model/manual to determine if the difficulty of the repair is easy or hard.