This is a replacement dishrack roller or wheel for your dishwasher. It is made of gray plastic, measures a little over an inch in diameter, and is sold individually. This roller is designed for the lo...
$20.08
In Stock
Order within the next 12 hrs and your part ships today!
This water access valve, also known as a water inlet valve, is a genuine replacement component designed for use in compatible dishwashers. It regulates the flow of water from the household supply into...
$46.92
In Stock
Order within the next 12 hrs and your part ships today!
This dishwasher door gasket creates a watertight seal between the door and the tub, preventing leaks during wash cycles. Made from flexible black rubber, it fits securely along the edge of the door to...
$23.53
In Stock
Order within the next 12 hrs and your part ships today!
If your dishwasher isn’t cleaning well, won’t start, or is leaking, this heat pump assembly could be the fix. It’s designed to fit select Bosch, Thermador, and Gaggenau models and helps circulate and ...
$216.29
In Stock
Order within the next 12 hrs and your part ships today!
This drain pump is designed for use in various dishwasher models and is responsible for efficiently removing water at the end of each cycle. It directs the water through the drain hose, which connects...
$69.01
In Stock
Order within the next 12 hrs and your part ships today!
This replacement micro filter is designed to trap small food particles and debris during the wash and rinse cycles, helping to maintain optimal cleaning performance in your dishwasher. Positioned with...
$60.96
In Stock
Order within the next 12 hrs and your part ships today!
This upper spray arm is a key component in many dishwashers, designed to distribute water evenly across dishes placed in the top rack. Located beneath the upper rack, it features multiple nozzles that...
$44.07
In Stock
Order within the next 12 hrs and your part ships today!
This drain hose helps your dishwasher get rid of dirty water after each cycle. It connects to your home’s plumbing and keeps things flowing smoothly. If your dishwasher isn’t draining, smells bad, or ...
$39.01
In Stock
Order within the next 12 hrs and your part ships today!
If your dishwasher’s bottom rack is broken or rusted, this replacement rack can help get things back in order. It’s designed to fit a variety of Bosch, Thermador, and Kenmore models and holds your dis...
$211.17
In Stock
Order within the next 12 hrs and your part ships today!
Having trouble with your dishwasher? Let's help you solve that with the Bosch Dishrack Tine Row Holder. This is an original, high-quality part that helps your dishwasher work at full efficiency by sec...
$8.51
In Stock
Order within the next 12 hrs and your part ships today!
If your dishwasher isn’t draining properly, this drain pump cover might be the part you need. It helps guide water from the bottom of the dishwasher to the drain pump so everything flows smoothly. Mad...
$33.15
In Stock
Order within the next 12 hrs and your part ships today!
Questions And Answers for SHSM63W55N
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Richie
December 12, 2022
E11 comes up on display. It won’t start washing
For model number SHSM63W55N
Hello Richie, thank you for reaching out. The E11 error code indicates that the resistance values received from the temperature sensor are out of range. On newer Bosch dishwashers the thermistor is integrated into the heat pump. We suggest that you check the circulation pump with the heater, part number PS11724988, and replace it if it is damaged. If you require assistance to place an order, please contact customer service. We hope that helps!
Unit will not power up at all but making low on and off hum. Verified power to plug. No response to reset or reboot (unplug and replug)
For model number SHSM63W55N
Hello Bruce, thank you for contacting us. We have researched and found that the issue seems to be with the control board, part number PS12075525 and Switch, part number PS8728608. If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
This dishwasher was replaced some years ago by our Home Warranty Service and we have discovered that the piece below the door (kick plate? ) is missing. Can we get one?
For model number SHSM63W55N
Hi Judy, thank you for your inquiry. The compatible toe panel for your model is part number PS8737021. If you need help placing an order, customer service is open 7 days a week!
I have shut off at the breaker for longer than 5mins. Breaker on. Unit has no display. After a moment the pump will start and can not turn off or reset at control panel.. Only at breaker.
Thank You !!
For model number SHSM63W55N
Hi David, thank you for contacting us. Based on our understanding, we would suggest checking the power module programmed, part number PS12075525. You may need to replace it to fix the issue. We hope this sorts out your problem!
Hello Eddie, thank you for reaching out. Unplug the unit, wait 1?minute, then plug it back in. This clears transient faults and may allow a start. If this does not help, we would suggest checking the door switch, part number PS8728608. A faulty door switch is a very common reason a dishwasher won't start. The machine has a safety mechanism that prevents it from running if the door is not securely closed. We hope this solves your problem!
The bottom rack of our Bosch dishwasher was discontinued & no longer available anywhere, so we ordered an OEM replacement rack from PartSelect.com & hoped that it would fit.
The new rack fits perfectly & is actually an improvement over the old one. The new rack doesn't have a vase tower, but that is actually a big design improvement because it can store more dishes & is more flexible than the old one. The new rack comes without a handle cover, but it was very easy to move the handle cover from our old rack to the new one.
The E:15 error code means water is detected in the pan under the unit. There are several ways this can happen.
In this case, it was caused by a bad inlet valve. It did not close properly and led to an overflow of water inside that eventually spilled into the pan underneath the unit.
I see now why the pump keeps running after this error. In this case, it would have led to a big flood in the kitchen if it did not.
I was actually able to run the unit while broke by manually operating the valve under our sink that provides water to the unit.
Be sure to turn off breaker before servicing. Don't get shocked!
Be sure to turn off water before starting! Or, you'll have a flood.
Anyway, I just pulled the unit out (was secured by 2 screws on the sides). I lifted up the insulation material on the left side to get at the valve. Pushed a little green tab to release the electrical plug. Then, use pliers to move clamp off the white water hose on the inside. Then, pull of white hose. This was hard in my case. Took a lot of force. Then, reach behind the unit and use pliers to unscrew water hose. Now, the whole gray panel there can pop out with some force. Then, slip the old valve out and slip new one in. Reconnect hoses and clamp. Note that I put some caulk on the connector where white hose goes. Not sure if needed or not.
