This water access valve, also known as a water inlet valve, is a genuine replacement component designed for use in compatible dishwashers. It regulates the flow of water from the household supply into...
$46.92
In Stock
Order within the next 1 hr and 18 mins and your part ships today!
This wheel for the lower rack of your dishwasher, it includes the brushing you will need for installation; the axel is not included. You need to line the replacement wheel up with the axel, slide it i...
This dishwasher door gasket creates a watertight seal between the door and the tub, preventing leaks during wash cycles. Made from flexible black rubber, it fits securely along the edge of the door to...
$23.53
In Stock
Order within the next 1 hr and 18 mins and your part ships today!
If your dishwasher isn’t cleaning well, won’t start, or is leaking, this heat pump assembly could be the fix. It’s designed to fit select Bosch, Thermador, and Gaggenau models and helps circulate and ...
$216.29
In Stock
Order within the next 1 hr and 18 mins and your part ships today!
This part is a replacement tine row clip for your dishwasher. The tine row clip is adjustable, and it fits onto your dishrack to holds the tines into place. If your dishrack tine rows will not stay in...
$9.77
In Stock
Order within the next 1 hr and 18 mins and your part ships today!
This drain pump is designed for use in various dishwasher models and is responsible for efficiently removing water at the end of each cycle. It directs the water through the drain hose, which connects...
$69.01
In Stock
Order within the next 1 hr and 18 mins and your part ships today!
This replacement micro filter is designed to trap small food particles and debris during the wash and rinse cycles, helping to maintain optimal cleaning performance in your dishwasher. Positioned with...
$60.96
In Stock
Order within the next 1 hr and 18 mins and your part ships today!
This upper spray arm is a key component in many dishwashers, designed to distribute water evenly across dishes placed in the top rack. Located beneath the upper rack, it features multiple nozzles that...
$44.07
In Stock
Order within the next 1 hr and 18 mins and your part ships today!
This drain hose helps your dishwasher get rid of dirty water after each cycle. It connects to your home’s plumbing and keeps things flowing smoothly. If your dishwasher isn’t draining, smells bad, or ...
$39.01
In Stock
Order within the next 1 hr and 18 mins and your part ships today!
If your dishwasher’s bottom rack is broken or rusted, this replacement rack can help get things back in order. It’s designed to fit a variety of Bosch, Thermador, and Kenmore models and holds your dis...
$211.17
In Stock
Order within the next 1 hr and 18 mins and your part ships today!
Questions And Answers for SHPM65Z55N
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dan
December 23, 2024
Washer does not dry thoroughly and appears to abort the cycle before the scheduled finish time. My model number is not recognized on the parts order model list. The recommended part of model SHPM65W55N is PS11724988. Will this work on my older model? However, I do not see such a part on the interior of my washer. I presume it should be on the back wall. Is it possible that the part was lost in an earlier repair a few months ago? Or would the washer not work at all with that part missing?
For model number SHPM65Z55N
Hello Dan, thank you for contacting us. Yes, the part you mentioned is compatible with your model. It is located at the bottom of the dishwasher. Based on our understanding of the issue that you are facing, we would suggest checking the turbidity sensor, part number PS8727345, to solve the problem. A malfunctioning turbidity sensor can cause the dishwasher to not dry thoroughly and abort the cycle before the scheduled finish time. We hope this helps!
Hi. I need a stainless steel front outer door panel
For model number SHPM65Z52N/01
Hello Frank, thank you for reaching out. The stainless steel front outer door panel for your model is part number PS12729314. We hope this information is useful!
start switch seems hard to push and washer onleys lets red light blink
For model number SHPM65Z55N
Hello Samuel, thank you for contacting us. According to our research, the "hard to push" start button combined with a flashing light often points to a worn or misaligned door latch or lock assembly. Check the door latch with lock assembly, part number PS12586966. Open the door and check the metal latch at the top center. If it is damaged, bent, or not clicking properly, it needs to be replaced. We hope this information helps!
Is the Circulation pump (12008381) also the drain pump
For model number SHPM65Z55N
Hi Lee, thank you for reaching out. No, the circulation pump and drain pump are not the same. The drain pump for your model is part number PS11704799. We hope that helps!
The bottom rack of our Bosch dishwasher was discontinued & no longer available anywhere, so we ordered an OEM replacement rack from PartSelect.com & hoped that it would fit.
The new rack fits perfectly & is actually an improvement over the old one. The new rack doesn't have a vase tower, but that is actually a big design improvement because it can store more dishes & is more flexible than the old one. The new rack comes without a handle cover, but it was very easy to move the handle cover from our old rack to the new one.
The E:15 error code means water is detected in the pan under the unit. There are several ways this can happen.
In this case, it was caused by a bad inlet valve. It did not close properly and led to an overflow of water inside that eventually spilled into the pan underneath the unit.
I see now why the pump keeps running after this error. In this case, it would have led to a big flood in the kitchen if it did not.
I was actually able to run the unit while broke by manually operating the valve under our sink that provides water to the unit.
Be sure to turn off breaker before servicing. Don't get shocked!
Be sure to turn off water before starting! Or, you'll have a flood.
Anyway, I just pulled the unit out (was secured by 2 screws on the sides). I lifted up the insulation material on the left side to get at the valve. Pushed a little green tab to release the electrical plug. Then, use pliers to move clamp off the white water hose on the inside. Then, pull of white hose. This was hard in my case. Took a lot of force. Then, reach behind the unit and use pliers to unscrew water hose. Now, the whole gray panel there can pop out with some force. Then, slip the old valve out and slip new one in. Reconnect hoses and clamp. Note that I put some caulk on the connector where white hose goes. Not sure if needed or not.
