This is a replacement dishrack roller or wheel for your dishwasher. It is made of gray plastic, measures a little over an inch in diameter, and is sold individually. This roller is designed for the lo...
This water access valve, also known as a water inlet valve, is a genuine replacement component designed for use in compatible dishwashers. It regulates the flow of water from the household supply into...
This dishwasher door gasket creates a watertight seal between the door and the tub, preventing leaks during wash cycles. Made from flexible black rubber, it fits securely along the edge of the door to...
If your dishwasher isn’t cleaning well, won’t start, or is leaking, this heat pump assembly could be the fix. It’s designed to fit select Bosch, Thermador, and Gaggenau models and helps circulate and ...
This drain pump is designed for use in various dishwasher models and is responsible for efficiently removing water at the end of each cycle. It directs the water through the drain hose, which connects...
This replacement micro filter is designed to trap small food particles and debris during the wash and rinse cycles, helping to maintain optimal cleaning performance in your dishwasher. Positioned with...
This upper spray arm is a key component in many dishwashers, designed to distribute water evenly across dishes placed in the top rack. Located beneath the upper rack, it features multiple nozzles that...
This drain hose helps your dishwasher get rid of dirty water after each cycle. It connects to your home’s plumbing and keeps things flowing smoothly. If your dishwasher isn’t draining, smells bad, or ...
If your dishwasher’s bottom rack is broken or rusted, this replacement rack can help get things back in order. It’s designed to fit a variety of Bosch, Thermador, and Kenmore models and holds your dis...
Having trouble with your dishwasher? Let's help you solve that with the Bosch Dishrack Tine Row Holder. This is an original, high-quality part that helps your dishwasher work at full efficiency by sec...
$8.51
In Stock
Questions And Answers for SHPM65W55N
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lee
January 20, 2023
This dishwasher starts but any cycle I choose the cycles stops exactly after 3 minutes as per the timer. Can hear humming but the clock stops
For model number SHPM65W55N
Hello Lee, Thank you for your inquiry. The appliance will stop mid-cycle if the door is not closed properly. Ensure that the door is shut firmly and the latch engages fully. Check if the rear panel is being pressed in, for example by a hose holder, which has not been removed, and check the seal. It could also be an issue with the door lock assembly, the door switch, or the circulation pump. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. We hope this assists you with your repair.
I am looking for a wiring diagram and a piece for the front panel of this dishwasher. Someone took it apart to fix a dent and now we don't know how to wire it back. Also i need a piece for that as well. I an send pics if necessary. Yellow cord with plug ins on both ends. Can someone help me?
For model number SHPM65W55N
Hello Diane and thanks for writing.
For more specialized assistance or to speak with someone about this, we would suggest calling the manufacturer of the unit directly. Once you get the information you need, we should be able to find the information on our site for you. We hope this helps Bosch 800-503-5028 We do carry related parts for units just like yours. For example, part number PS8727387 Good luck with your repair.
Hello Bob, Thank you for the question. This Error normally indicates a high water pressure. The water pressure should be in the range from 0.03 to 1 MPa. We hope this helps.
Was this helpful?
Thank you for voting!
Matt
December 28, 2022
Hi there, the very top rack of my dishwasher broke and I’m looking for a replacement. I can’t seem to find where I can buy it? Just for clarification it’s the top silverware rack.
For model number SHPM65W55N
Hi Matt,
Thank you for your question. The part number listed under your model number for the cutlery drawer is PS12075275. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
My new dishwasher has stainless steel door panel. Can I swap it for a fingerprint proof one? It's driving me crazy
For model number SHPM65W55N
Hello Terry, thank you for your question. There is not a fingerprint proof. It comes in Stainless, Black PS11758443 and White PS11758441. We are pleased to have been able to help.
The bottom rack of our Bosch dishwasher was discontinued & no longer available anywhere, so we ordered an OEM replacement rack from PartSelect.com & hoped that it would fit.
The new rack fits perfectly & is actually an improvement over the old one. The new rack doesn't have a vase tower, but that is actually a big design improvement because it can store more dishes & is more flexible than the old one. The new rack comes without a handle cover, but it was very easy to move the handle cover from our old rack to the new one.
The E:15 error code means water is detected in the pan under the unit. There are several ways this can happen.
In this case, it was caused by a bad inlet valve. It did not close properly and led to an overflow of water inside that eventually spilled into the pan underneath the unit.
I see now why the pump keeps running after this error. In this case, it would have led to a big flood in the kitchen if it did not.
I was actually able to run the unit while broke by manually operating the valve under our sink that provides water to the unit.
Be sure to turn off breaker before servicing. Don't get shocked!
Be sure to turn off water before starting! Or, you'll have a flood.
Anyway, I just pulled the unit out (was secured by 2 screws on the sides). I lifted up the insulation material on the left side to get at the valve. Pushed a little green tab to release the electrical plug. Then, use pliers to move clamp off the white water hose on the inside. Then, pull of white hose. This was hard in my case. Took a lot of force. Then, reach behind the unit and use pliers to unscrew water hose. Now, the whole gray panel there can pop out with some force. Then, slip the old valve out and slip new one in. Reconnect hoses and clamp. Note that I put some caulk on the connector where white hose goes. Not sure if needed or not.
