This wheel is a dishwasher rack wheel designed for the upper rack of your appliance. The roller wheel is approximately 1.25 inches in diameters and includes the brushing you need for installation. It ...
This replacement micro filter is designed to trap small food particles and debris during the wash and rinse cycles, helping to maintain optimal cleaning performance in your dishwasher. Positioned with...
If you’re seeing water puddles near your dishwasher or noticing louder wash cycles, the bottom door seal might be worn out. This part keeps water and steam inside during a wash and helps your dishwash...
This is a replacement water inlet valve for your washer. The water inlet valve in your washer connects to the water source and solenoid wires, and ensures the tub has the right amount of water enterin...
Keep your dishwasher or refrigerator draining properly with this replacement drain hose. It helps move used water out of the appliance and into your home’s plumbing system, preventing puddles and left...
If your dishwasher is leaking or not draining properly, this replacement drain hose might be the fix. It connects the dishwasher to your sink drain or garbage disposal, carrying away dirty water after...
If your dishwasher isn’t draining properly, this drain pump cover might be the part you need. It helps guide water from the bottom of the dishwasher to the drain pump so everything flows smoothly. Mad...
This door lock assembly helps keep your dishwasher door securely closed during each cycle. It prevents leaks and ensures the appliance operates safely and efficiently. If your dishwasher won’t start, ...
Keep your silverware neat and clean with this Bosch dishwasher basket. It fits in the lower rack and has separate sections for utensils plus a handy handle for easy removal. Made from sturdy plastic, ...
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Scott
October 31, 2022
The sanitized light does not come on at the end of the cycle. I have checked the incoming water temp and it is 128 degrees F, well above the minimum temp (120 degrees F) the manual says is needed for the sanitize light to come on. Can you help me with this problem?
For model number SHE4AM15UC/01
Hello Scott, thank you for the question. Try to flip the breaker off to the dishwasher or unplug the dishwasher for 5 minutes, to see if the electronics will reset. If that does not resolve the issue, there is a problem with your main control board, part number PS8732999. Replacing it will fix your problem. Please reach out to customer service if you need help placing an order. Glad to be of help!
We let this go for a shameful amount of time before I decided I could probably fix it. The roller broke so you could only pull it out about halfway or it would come off the track. I looked up the part, and bought it. Actually bought two in case it happened again. When I arrived I looked at how it was put together on the other side and then just basically pushed it onto the rod and it was fixed. I am ashamed it took so long to do it. Never be afraid to try it yourself. It was a total of $10 shipped to fix it.
replacing the sensor was simple, just unplug and turn it out, but didn't solve the problem, it's a float sensor that doesn't show up on the tech sheet in the dishwasher or anywhere in troubleshooting on the internet I could find.
Remove the dishwasher from under the counter. Remove door springs. On the inside of the lip of the door remove the 6 screws that hold the outer door panel on, and remove panel. this will expose hinge screws. Remove the two screws per side holding the inner door to the hinge assembly. Take pictures of the way the gasket's grey plastic end cap assembles between the inner door frame and the hinge, and remove the inner door. The old gasket has a channel lip that sits on the plastic edge of the washer tub, pull it off this lip and discard. Install new gasket and put it all back together! Use this opportunity to clean the gunk out of the upper door seals.
