This part is a replacement tine row clip for your dishwasher. The tine row clip is adjustable, and it fits onto your dishrack to holds the tines into place. If your dishrack tine rows will not stay in...
$7.47
In Stock
Order within the next 1 hr and 18 mins and your part ships today!
Order within the next 1 hr and 18 mins and your part ships today!
Questions And Answers for SHE3AR75UC/06
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Des
July 21, 2021
Looking for upper spray arm connection. Arm has fallen off and need connector/s to reattach upper spray arm.
For model number SHE3AR75UC/06
Hello Des, Thank you for the question. The Upper Arm Connector is only sold with the Upper Arm Assembly. PartSelect Number PS8732985. We hope this helps!
My upper spray arm fell off. Tried to snap back in or find a way to secure with nut but nothing.
For model number SHE3AR75UC/06
Hello Jon, thank you for contacting us. According to our research, the issue is likely with the spray arm, part number PS8732985. You may need to replace it. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
We let this go for a shameful amount of time before I decided I could probably fix it. The roller broke so you could only pull it out about halfway or it would come off the track. I looked up the part, and bought it. Actually bought two in case it happened again. When I arrived I looked at how it was put together on the other side and then just basically pushed it onto the rod and it was fixed. I am ashamed it took so long to do it. Never be afraid to try it yourself. It was a total of $10 shipped to fix it.
disconnected inlet hose and water line from sink, removed old inlet valve and installed new valve and reconnected inlet hose and water line from sink - checked for leaks.
This was the third time I replaced a fill valve in a Bosch diswasher, twice in this unit and once in a previous unit. I read the installation hints on your web site and want to add the following suggestion.
The notes on your web site say you can remove the valve from behind the toe face and pull it out to reach the hose and plug. I found that the Bosch designers called for both the hose and wire to on the short side. I found that pulling the dishwasher forward 6" to 9" allows you to access these connections from the side at least to hold them while making the connection. I hope this helps. Thank you, Bill