This wheel is a dishwasher rack wheel designed for the upper rack of your appliance. The roller wheel is approximately 1.25 inches in diameters and includes the brushing you need for installation. It ...
$18.30
In Stock
Order within the next 9 hrs and your part ships today!
This is a replacement dishrack roller or wheel for your dishwasher. It is made of gray plastic, measures a little over an inch in diameter, and is sold individually. This roller is designed for the lo...
$20.08
In Stock
Order within the next 9 hrs and your part ships today!
This dishwasher door gasket creates a watertight seal between the door and the tub, preventing leaks during wash cycles. Made from flexible black rubber, it fits securely along the edge of the door to...
$23.53
In Stock
Order within the next 9 hrs and your part ships today!
If your dishwasher isn’t draining properly, this drain pump cover might be the part you need. It helps guide water from the bottom of the dishwasher to the drain pump so everything flows smoothly. Mad...
This door lock assembly helps keep your dishwasher door securely closed during each cycle. It prevents leaks and ensures the appliance operates safely and efficiently. If your dishwasher won’t start, ...
$57.38
In Stock
Order within the next 9 hrs and your part ships today!
This dishwasher door cable guide helps ensure the door opens and closes smoothly by directing the movement of the door cable and spring assembly, keeping the door properly balanced during use. Sold as...
$27.01
In Stock
Order within the next 9 hrs and your part ships today!
Keep your dishwasher running safely with this door switch. It makes sure the door is closed before the cycle begins, preventing leaks and start-up problems. If your dishwasher won’t start or the latch...
$54.69
In Stock
Order within the next 9 hrs and your part ships today!
This replacement hose is designed to transport water or air between internal appliance components. It is commonly replaced when leaking, cracked, or blocked and helps restore safe, efficient operation...
$20.08
In Stock
Order within the next 9 hrs and your part ships today!
We let this go for a shameful amount of time before I decided I could probably fix it. The roller broke so you could only pull it out about halfway or it would come off the track. I looked up the part, and bought it. Actually bought two in case it happened again. When I arrived I looked at how it was put together on the other side and then just basically pushed it onto the rod and it was fixed. I am ashamed it took so long to do it. Never be afraid to try it yourself. It was a total of $10 shipped to fix it.
I removed the old gasket easily, it pulled right out. I spent a few minutes cleaning the gunk out from the seam using a standard kitchen cleaner (it was gross and I had to do it multiple times). Tip: pay attention to the shape of the gasket and which side faces in vs. out when pulling out the old one. Also, for reference, take a photo of the old gasket and how it's positioned before pulling it out. Then, simply start at the bottom (either side) and insert the new gasket. Work your way up, over and down the other side. If it's facing the right way it'll go in very easily, if not is will be very difficult—this is how you'll know. After installation, run your dishwasher empty for a full cycle (with towel underneath the door) and check back frequently during the cycle. If there are no leaks you're done. This was the fastest, easiest way to attempt to fix a leaky door and eliminate the gasket as the problem (which it did!) If the machine still leaks the issue is likely something bigger.
