RN46-1 (Type 0) Bostitch Nailer - Overview

Sections of the RN46-1

[Viewing 1 of 1]
Page A Diagram and Parts List for Type 0 Bostitch Nailer
Page A
Keep searches simple, eg. "belt" or "pump".
Seal,Check – Part Number: 149812
Seal,Check
PartSelect #: PS10246371
Manufacturer #: 149812
  No Longer Available
Spring,Torsion Door Latch – Part Number: 149831
Spring,Torsion Door Latch
PartSelect #: PS10246380
Manufacturer #: 149831
  No Longer Available
Feed,piston – Part Number: 149852
Feed,piston
PartSelect #: PS10246389
Manufacturer #: 149852
  No Longer Available
Nose – Part Number: 160143
Nose
PartSelect #: PS10246495
Manufacturer #: 160143
  No Longer Available
SCREW-SOC HD. CAP M5 – Part Number: MSC5080-20
SCREW-SOC HD. CAP M5
PartSelect #: PS12508345
Manufacturer #: MSC5080-20
$5.95
  Special Order
COLLAR-SPRING – Part Number: 149853
COLLAR-SPRING
PartSelect #: PS12413163
Manufacturer #: 149853
$5.95
  Special Order
Assembly,Sleeve – Part Number: 9R207544
Assembly,Sleeve
PartSelect #: PS12002890
Manufacturer #: 9R207544
  No Longer Available
STOP-FEED PISTON – Part Number: 149855
STOP-FEED PISTON
PartSelect #: PS12417198
Manufacturer #: 149855
$5.95
  Special Order
Lube (2cc) – Part Number: 9R206705
Lube (2cc)
PartSelect #: PS16684427
Manufacturer #: 9R206705
This genuine manufacturer-approved lube which is specially made for use with power tools. It helps to lubricate the system allowing for easy movement and protecting parts from usual wear. Please make ...
$5.95
  Special Order
FEED PAWL – Part Number: 9R205576
FEED PAWL
PartSelect #: PS12503745
Manufacturer #: 9R205576
This genuine replacement feed pawl is designed for use in various models of roofing nailers and is a key component of the tool’s feeding system. Positioned on the feed bar, the feed pawl rotates to pu...
$28.14
  Special Order
O-RING – Part Number: 88998
O-RING
PartSelect #: PS12505033
Manufacturer #: 88998
This is a genuine Bostitch replacement part that has been sourced from the original manufacturer to be used with pneumatic nailers. The o-ring is part of the nose assembly. This item is used to seat t...
$5.95
  In Stock
NUT-NYLON M3X.50 – Part Number: MHE3050-100
NUT-NYLON M3X.50
PartSelect #: PS12521246
Manufacturer #: MHE3050-100
This lock nut is sourced from original equipment manufacturer for use with Bostitch nailers and staplers. It is a high quality hardware that has multiple applications depending on your tool. Please ma...
$5.95
  In Stock
Back to Top
View More

Questions And Answers for RN46-1

Be the first to ask our experts a question about this model!

Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
would not fire nails
remove 2 Philips head screws, drive out drift pins with drill bit. Remove TVA6 replace with new TVA6 making sure TVA6 is completely seated and slots are aligned with drift pin holes! Drive in drift pins. Replace trigger and screws.
This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem resolved
Parts Used:
KIT-TRIGGER VALVE
  • Richard from Bogalusa, LA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
6 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top
View More