RL53 Microwave - Instructions

There was nothing to actually, I just put in the bottom of the oven and cooked my sausage about 40 seconds later there is a loud POP and that's it. End of repair, end of breakfast, end of oven. I am returning the glass tray to you and asking for a refund. It was less expensive to go buy a new oven then to have that 30 year old repaired!

I do thank you for you prompt service and shipping.
We can't say we didn't try.

Removed side access panel and replaced spring. The only complication was the Torx screws that secured the side panel. The screw heads had an integral pin in the center of the head that would not allow the Torx tool to be inserted I used my Dremel tool with a cutoff wheel to make a straight slot in the head of each screw and then used a straight screwdriver to remove and re-insert the screws.

removed cover of microwave, replaced fuse checked for short at plug with volt ohm meter, there was a short at the plug then checked magnetron for short and there was a short at the magnetron, the cap and diode checked good.

replaced magnetron IT IS WORKING GREAT !!