This is the replacement charcoal filter for your microwave. It is silver and black in color and measures approximately 10 inches by 2 ½ inches. The charcoal filter removes cooking odors from the air ...
This is a genuine replacement 40 watt bulb for a microwave. The bulb is meant to light up the underside of the microwave or inside of your microwave when the door is open or during use. If your bulb i...
When your microwave isn't heating your food evenly, the problem could lie with the rotating ring assembly - a crucial piece in ensuring proper function. Our GE Rotating Ring Assembly might just be the...
Are you facing issues with your microwave vent grille? The Microwave Vent Grille Assembly from GE is here to help. This small but mighty part plays a crucial role in maintaining your microwave's effic...
Do you have a microwave that's not performing to the best of its ability? It might be time to consider GE's Damper Bracket. Designed particularly for microwave appliances, this high-quality component ...
This turntable motor is for microwaves.
The turntable motor rotates the glass tray inside the microwave oven.
Because high-voltage capacitors in a microwave can retain a lethal electrical charge...
If your microwave suddenly stopped working, this 20-amp fuse might be the reason. It’s designed to blow when there’s a power surge, protecting your appliance from damage. This genuine part fits many G...
Is your microwave not working like it used to? The problem might be with the door monitor switch, and we at GE have the perfect solution for you. The GE Microwave Switch is a small yet vital part of y...
No Longer Available
Questions And Answers for PVM9005SJ2SS
Ask our experts a question about this model and we'll get back to you as soon as possible!
8 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Craig
February 10, 2020
Digital display will go off and later come back on. Sometimes when cooking it will work normally, other times will cut off and display goes blank again
Hello Craig, Thank you for the question. Normally this is an indication the Main Board PartSelect Number PS11762546 will need to be replaced. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Zafer
February 11, 2020
Most of the control buttons stop working suddenly only few of them still work
Start,cancel 1 minute these are not working only 2 minutes working
For model number PVM9005SJ2SS
Hi Zafer,
Thank you for your question. Try running a hair dryer on low heat over the buttons on the touchpad for a few minutes and press the buttons to see if you can get them to work. if not you will need to replace the control panel assembly. We hope this helps. Thank you and have a great day.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Kathy
March 31, 2023
Need to replace the charcoal filter and could not find the correct filter number. Thanks!
For model number PVM9005SJ2SS
Hi Kathy, thank you for reaching out. The part you are looking for is the charcoal filter, part number PS8746150. We hope this helps!
The oblong door at the inside broke. It doesn’t snap into place. Can I buy a replacement?
For model number PVM9005SJ2SS
Hi Maria, thank you for reaching out. Yes, the waveguide cover for your model is part number PS11762217. We hope that helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Larry
December 16, 2023
How do I replace the interior light?
For model number PVM9005SJ2SS
Hi Larry, Thank you for writing. Always unplug your microwave before completing any repairs. Inside the cavity of the appliance there is a cover that unscrews to remove it and expose the Bulb to replace. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Open the front cover by pushing it at the top (where it says “Push”), lifting up and pushing back on top edge of the old filter. Pull it out. Installing the new one is basically just the reverse of those steps! That simple.
Old filter did seem to be a little thicker (filter material), but the new one was the exact same dimensions, so it went in properly. Wish the filter material was white, so you knew just how dirty it was actually getting. But... :-D
Turned power off, removed screws from outer cover, opened door, slide cover off, removed screws, lifted panel open, removed electrical connections, then removed keypad panel. Removed screws for fan cover then removed cover. Saw blown fuse replaced fuse also used ohm meter to measure resistance of the thermostat it was shorted. removed screw holding it in place removed 2 connectors took out thermostat inserted new thermostat screwed in place put connectors back on. Put fan cover on put screws in, put key panel on reconnect all connections to key panel put screws in put cover on, screw in, turn power on.
