PTED1501WCA (ASDATRA) LG Air Conditioner - Overview
Sections of the PTED1501WCA
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
BEARING
PartSelect #: PS12075835
Manufacturer #: 4280A20004M
Tired of the sweltering heat because your air conditioner isn't working as it should? Don't worry, we've got you covered. You need the LG Air Conditioner Blower Wheel Heat Pump Bearing. This is not ju...
$25.95
In Stock
Order within the next 10 hrs and your part ships today!
Damper,Compressor
PartSelect #: PS3525492
Manufacturer #: 4H00982E
$10.40
In Stock
Order within the next 10 hrs and your part ships today!
Cross Flow Fan Assembly
PartSelect #: PS3528627
Manufacturer #: 5901A10027A
This part is used to produce an even airflow to keep components from overheating. It can be mounted horizontally or vertically.
$186.82
Special Order
Clamp,Spring
PartSelect #: PS3522762
Manufacturer #: 3H02932B
The fan blade clamp, also known as a clamp spring, are for air conditioners. The clamp supports the fan blade on the motor shaft. When the motor is running, it signals the shaft to turn and rotate, bu...
$10.29
Special Order
Fan Motor
PartSelect #: PS3523199
Manufacturer #: 4681A20064N
If you're dealing with an air conditioner that's not cooling as it should, this Indoor Fan Motor Assembly from LG might be just what you need. Designed by LG, a brand trusted worldwide, this genuine O...
$230.58
Special Order
Questions And Answers for PTED1501WCA
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the PTED1501WCA
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Blower fan motor
Blower fan motor not working. Partselect representative he guide me. Make sure new motor diameter is wide. Purchase motor with mounting bracket. Old motor bracket will not working . my Ptac after installing new motor running smoothly.
Parts Used:
-
Nimesh from Urbana, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Motor mount broke due to imbalance caused by mud dobber nests.
Pulled PTAC out of wall sleeve, unhook wire harness from control area, remove condenser shroud and motor and fan blade all at the same time. Replaced motor bracket and re-installed in reverse order.
Parts Used:
-
Travis from LOUISVILLE, IL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Capacitor went out
-
Al from CROSS PLAINS, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
2 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!