The temperature sensor detects the temperature within the oven cavity. If your oven is too hot, not heating evenly, or has little to no heat when baking, you may need to replace the temperature sensor...
This surface element is for ranges. Surface elements supply the heat to a cooking area on top of the range. Unplug the range or shut off the house circuit breaker for the range before installing this ...
This radiant stovetop element, or burner, is a genuine replacement part, and is 8 inches in diameter. The radiant element heats your cookware as you prepare food on the stovetop. To complete this repa...
This part is a replacement screw for your oven. It is made of black metal and is sold individually. This screw is approximately 1/4 inch in diameter and about 1/2 inch in length. It is designed to con...
Cook with confidence using this dual radiant element for glass-top ranges. It heats evenly and gives you two size options—perfect for small pans or big pots. If your old burner isn’t heating right or ...
$191.09
Special Order
Questions And Answers for PS960SL1SS
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dorothy
November 26, 2019
Tried cleaning upper oven and now shows fault code 910 something to do with locking mechanism. Pressed cancel and oven thinks it is locked
For model number PS960SL1SS
Hello Dorothy, Thank you for the question. You can unplug the appliance for 5 mins and then reconnect power. Press and hold the Cancel button for 30 seconds and this shoudl clear the error. Hope this helps!
Was this helpful?
Thank you for voting!
Paul
October 31, 2023
There are two red blinking lights above the upper oven door.
For model number PS960SL1SS
Hello Paul, thank you for asking. Based on our understanding of the issue, we would recommend checking the control panel, part number PS16542214, to fix the issue. We hope this helps!
Was this helpful?
Thank you for voting!
Frank
November 4, 2023
Door gasket replacement
For model number PS960SL1SS
Hello Frank, thank you for contacting us. The upper door gasket for your model is part number PS8690564, and the lower door gasket for your model is part number PS8753686. Glad to be of help!
My oven was purchased new in 2018. Worked well for a few years and more recently the preheat function and burners require multiple attempts to turn on. In some cases the pre heat function will begin and end and turn off within a few minutes several times in a row and seems to be getting worse. Would the control board be the culprit? I’ve tried settings, powered off with breaker reset with no improvement. Thanks.
For model number PS960SL1SS
Hello Matthew, thank you for your inquiry. Based on the description that you have provided, we would recommend replacing the touch control panel, part number PS16542214, to fix the issue. We hope that helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Removed six 1/4" hex nuts on rear of oven. Then through front/inside removed a single 1/4" hex nut to actually remove sensor. Unplug sensor connector, remove. Reversed steps, push oven back in place and plugged in. Tested oven function.
I had to remove the oven from the wall because the sensor plug connction is behind the unit. Two screws hold the sensor inside the oven and then I disconnected the lead and pulled the sensor out from the front. I installed the new sensor, tightened the two screws holding it in and connected the lead. Then reinstalled the oven into the wall. Overall, a very easy repair once you get the oven out.
The existing terminal block on my Ge oven/Range had melted due to a loose wire causing sparking and starting the plastic casing of the terminal block on fire and melting it, Part select made the part easy to find and had it at my house in 2 days. All I had to do was remove six screws to take the back sheet metal cover off of the oven. Unscrew the terminal connections remove two mounting screws that held the terminal on to the oven body. This was a little trickier than it should have been because the melted plastic had reformed making it very hard to access the mounting screws. i then mounted the new piece and plugged the oven in, it took 15 minutes and was very easy. definitely saved me at-least a $100 for the service call i would have made if finding the part wasn't so convenient
