This OEM ice and water filter fits side-by-side and bottom-freezer GE models. The most common reason you would need to change this part is if you have never updated your model and it is no longer filt...
This is a door handle fastener to secure the handle to your refrigerator drawer. It is also known and a mounting bolt or screw. It is approximately 1 inch in total length, and is made of metal.
This spring closure is a small but essential component that ensures refrigerator doors close tightly and smoothly. It provides the necessary tension for flipper or mullion seals to create a secure fit...
This refrigerator handle kit provides a sleek, durable solution for refreshing the look and functionality of your appliance. Crafted from high-quality stainless steel, the set includes handles for bot...
The lid bumper or evaporator fan motor bumper in your refrigerator prevents the fan motor from scraping against the side bracket. If your refrigerator/freezer is noisy, the bumper could be worn down o...
This fan motor circulates the air through the refrigerator grille and cools the compressor and condenser coils. It also helps to evaporate extra water in the drain pan.
This refrigerator mullion articulation assembly creates a secure seal between French doors to prevent cold air loss and maintain energy efficiency. Made from reinforced, durable plastic for long-lasti...
Are you tired of drinking water that tastes stale or warm? We have a solution for you'the GE Water Filter Head Assembly and Tube. This essential addition to your refrigerator holds the water filter, m...
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Konrad
August 26, 2023
Freezer is working but fridge isn’t cooling and it’s very noisy what’s the problem?
For model number PNE25JMKAKES
Hello Konrad, thank you for contacting us. According to our research, there seems to be an issue with the cover evaporator assembly kit, part number PS16874368. In order to resolve the issue, you may need to replace it. We hope this helps!
Just wanted to know the size of this model due to wildfires in my area I need to purchase a new fridge and I don't know if it was a 32 or 34 inch
For model number PNE25JMKAKES
Hi Donna, thank you for contacting us. Based on our research, your model has approximately the following dimensions:
Overall depth: 37 1/4 inches.
Overall height: 69-7/8 inches.
Overall width: 32-3/4 inches.
We hope this information helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Unscrew old filter and remove(counterclockwise). Line up arrow on new filter with arrow on connection housing. Turn clockwise till resistance met. Do not overtighten. Follow directions. Simple.
This story starts with a GE side-by-side refrigerator that has always had wide temperature swings and a temperamental water dispenser. The ice maker was not making ice, and the built in digital thermometer showed it was running warm. I suspected that the heat exchanger was full of dust and so looked there. What I found was that the condenser tank was hot to the touch and the fan wasn’t running. As an experiment, I aimed a fan at the it for a while I saw that the freezer temperature dropped back to normal. .The fan is marked as 11.2 DC so I checked for voltage at the fan and found some. With three wires and no wiring diagram I wasn’t sure this answered all the questions, but hooking the fan to a 12 volt power supply didn’t get it to spin. I priced parts at a couple websites before using partselect.com . They also have a good diagram to look at (Sears diagrams are really poor). I ordered the part with 2-day shipping; it arrived on time, was correct and fixed the problem.
Removed rear and front grills,brushed and vacuumed area- probably caused the fan motor to fail- unplugged fan, removed fan,motor,and shroud in 1 piece, carefully slipped fan off motor shaft, unscrewed shroud and motor. assembled in reverse order. Frige is in tight area, .I'll now roll it out and clean often
