PLGC30S9ECA Frigidaire Cooktop - Overview
Sections of the PLGC30S9ECA
[Viewing 4 of 4]
Manuals & Care Guides for PLGC30S9ECA
Click to downloadInstall
Installation Instructions
(6.40MB)
Manual
Owner's Manuals
(5.63MB)
Wiring
Wiring Diagram
(0.09MB)
Keep searches simple, eg. "belt" or "pump".
Sealed Burner Head - 14k
PartSelect #: PS820297
Manufacturer #: 316223400
Do you have a gas burner control valve that's underperforming and need a reliable solution? Here's the Frigidaire Sealed Burner Head with 14k power, a top-notch replacement part designed to get your a...
$100.29
Special Order
Igniter/Orifice Mounting Screw
PartSelect #: PS440022
Manufacturer #: 316240600
This part is the igniter/orifice mounting screw for your cooktop or range. It is approximately ½ an inch in length and is made of metal. The mounting screw connects the orifice to the cooktop. If the ...
$24.05
In Stock
Center Burner Orifice - 9.5K
PartSelect #: PS439993
Manufacturer #: 316237902
This small but important part helps your gas range cook evenly by controlling how much gas flows to the burner. Made for a 9,500 BTU burner, it keeps the flame steady and efficient. It’s a perfect fit...
$73.46
Special Order
Control Knob Kit - Black
PartSelect #: PS3491265
Manufacturer #: 5304480915
This kit includes 4 knobs. D-shaped shaft.
$235.99
In Stock
Questions And Answers for PLGC30S9ECA
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the PLGC30S9ECA
[Viewing 2 of 2]Will Not Start
Fixed by
these parts
these parts
Show All
Gas igniter glows, but will not light
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The burner would not light by itself, and the flame was lopsided.
The repair was nothing, but the diagnosis was a bit tricky. After carefully looking at the burner head, (cast aluminum) I pretty much figured out that the 4 small cast aluminum bumps that keep the burner cap positioned up in the air the correct amount to allow gas to flow under the cap, were worn down, preventing the gas from exiting properly by the igniter. My guess was correct. The new burner head solved all my problems. I love Parts Select for the ease of finding the correct parts and how fast they ship their orders. Great company, great service. Keep up the good work
Parts Used:
-
Roland from Auburn, ME
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
26 of 29 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken ceramic burner element
Simple: remove the element by hand and replace new one.
I can't believe how quickly I received my new part -literally next day.
I can't believe how quickly I received my new part -literally next day.
Parts Used:
-
Phillip from Saint Simons Island, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
9 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The repair part did not include the screws and the old ones were rusted and broke
The burner skirt should include the screws to attach it. The lack of screws complicates the installation as new holes need to be made
Parts Used:
-
GONZALO from DORAL, FL
-
Difficulty Level:Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
4 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!