PLCF489CCD Frigidaire Range - Overview
Sections of the PLCF489CCD
[Viewing 8 of 8]
Manuals & Care Guides for PLCF489CCD
Click to downloadInstall
Installation Instructions
(5.80MB)
Manual
Owner's Manuals
(3.5MB)
Specs
Product Specifications Sheet
(0.54MB)
Specs
Product Specifications Sheet
(0.47MB)
Wiring
Wiring Diagram
(0.27MB)
Keep searches simple, eg. "belt" or "pump".
Oven Bake Element
PartSelect #: PS3633414
Manufacturer #: 318255006
$247.90
In Stock
Order within the next 10 hrs and your part ships today!
Temperature Sensor
PartSelect #: PS820208
Manufacturer #: 316217002
Also known as Probe. The quick connect on this part may be different than your original part. If it doesn't fit, you have to cut off the quick connect and wire together with porcelain wire nuts.
$80.31
In Stock
Order within the next 10 hrs and your part ships today!
Light Bulb
PartSelect #: PS12751166
Manufacturer #: 316538904
This 40-watt appliance light bulb is a reliable replacement for use in select ranges, refrigerators, freezers, and microwaves. It provides bright, consistent lighting to help you see clearly inside yo...
$30.38
In Stock
Order within the next 10 hrs and your part ships today!
Main Terminal Block Kit
PartSelect #: PS471605
Manufacturer #: 5304409888
Terminal blocks (also called terminal boards or strips) provide a convenient means of connecting individual electrical wires.
$45.61
In Stock
Order within the next 10 hrs and your part ships today!
LENS
PartSelect #: PS16218465
Manufacturer #: 5304524341
This lens covers the interior oven light bulb.
$29.12
In Stock
Order within the next 10 hrs and your part ships today!
Broil Element
PartSelect #: PS3506411
Manufacturer #: 318255605
This broil element is found on the roof of the oven and heats food. The most common reasons you would need to replace this part is due to the oven not giving off enough heat, not turning on, or not ba...
$212.74
In Stock
Order within the next 10 hrs and your part ships today!
Oven Light Socket
PartSelect #: PS439060
Manufacturer #: 316116400
$74.88
In Stock
Order within the next 10 hrs and your part ships today!
Door Switch
PartSelect #: PS3633434
Manufacturer #: 318394803
$63.37
In Stock
Order within the next 10 hrs and your part ships today!
Convection Element - 2500W
PartSelect #: PS2368832
Manufacturer #: 318255511
This convection element generates heat to support even air circulation and consistent cooking performance. Its high-output design allows for efficient temperature recovery and uniform results. Replaci...
$134.40
In Stock
Order within the next 10 hrs and your part ships today!
Light Lens Retainer Clip
PartSelect #: PS470510
Manufacturer #: 5304400195
This retainer secures the light lens to the oven cavity.
No Longer Available
Levelling Leg with Rubber Pad
PartSelect #: PS444123
Manufacturer #: 318175503
Sold Individually.
$30.38
In Stock
Order within the next 10 hrs and your part ships today!
Fan Blade Retainer Nut
PartSelect #: PS439475
Manufacturer #: 316136600
Sold individually.
$35.46
In Stock
Order within the next 10 hrs and your part ships today!
Questions And Answers for PLCF489CCD
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michelle
March 10, 2020
Oven doesn't heat,try to change the heating element, and got an electric shock
For model number PLCF489CCD
Hello Michelle, thank you for your question. That sounds like a bad thermostat. We would recommend replacing PartSelect Number PS444406 thermostat. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Doug
November 9, 2022
The oven on my dual fuel stove does not get hotter then 120 degrees but the broiler works fine why
For model number PLCF489CCD
Hello Doug, thank you for contacting us. The issue is probably related to the bake element, part number PS3633414, or its connection is problematic with the terminal block, part number PS471605. We would also recommend testing the thermostat, part number PS444406. It turns the heat on and off to maintain the oven temperature you set. Please reach out to customer service if you need help placing an order. Glad to be of help!
Was this helpful?
Thank you for voting!
Related Parts:
Range Thermostat
$571.01
Special Order
Main Terminal Block Kit
$45.61
In Stock
Oven Bake Element
$247.90
In Stock
Valerie
January 18, 2020
All burners are "sparking" and clicking as if i'm trying to turn on one burner. Ceases when i turn off power to stove. Since all are, vs one , is there a main feed for electronic ignition? Any thoughts?
For model number PLCF489CCD
Hello and thank you for writing.
It certainly sounds like it could be a faulty spark module as all 4 burners are effected PS11770793, you should check for signs of damage, and replace as necessary. In rare cases, one faulty burner ignitor PS443849 will case the rest of the burners cause acting up. We hope this helps. Please contact us anytime if you require further assistance.
Was this helpful?
Thank you for voting!
Related Parts:
Burner Igniter
$70.26
In Stock
SPARK MODULE
$100.29
In Stock
- < Prev
- 1
- Next >
Common Symptoms of the PLCF489CCD
[Viewing 7 of 7]Little to no heat when baking
Fixed by
these parts
these parts
Show All
Element will not heat
Fixed by
these parts
these parts
Show All
Oven is too hot
Fixed by
these parts
these parts
Show All
Oven not heating evenly
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Little to no heat when broiling
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
oven element broken
The repair was simple; first I removed the 2 screws from the old element and disconnected the wires and then I inserted the new element reconnected the wires and replaced the screws . The repair was easy and took less that 15 min. The oven works as good as new and I saved alot of money by doing it myself.
Parts Used:
-
Van from Sanford, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
169 of 194 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven not heating to desired temperature
Replaced clock control by removing surface burner control knobs and plastic nuts, and then the cover over the oven control. Two screw hold the clock in place, after removal and disconnecting the plug-in you can reinstall the new clock control. The Heat Sensor inside the oven will also need to be replaced. It is located inside the oven and attached with two screws; the back of the oven will need to be removed to unplug. Reverse removal procedure and turn the power back on to the stove.
Parts Used:
-
Dan from Bellevue, ID
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
155 of 241 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cord was not tightened enough by delivery crew.
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
Parts Used:
-
Timothy from Spring Valley, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
107 of 171 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!