This OEM-compatible screw is designed for use with many GE dishwashers. Measuring 8-16 HXW and 1/2" in length, this stainless steel screw secures the middle spray arm hub to the upper rack assembly, e...
This is replacement door latch for your dishwasher. The door latch is attached to the tub frame, and connects to the door strike to keep your dishwasher door closed during operation. If you have a bro...
This dishwasher tub gasket creates a watertight seal between the tub and door to prevent leaks and maintain efficient performance. Made from durable rubber, it fits into the tub’s channel and is easy ...
Are you grappling with a faulty GE dishwasher? Maybe the lower rack just won't stay put? Let's help you put an end to that stress. Our GE Lower Rack Clip might just be what you've been searching for. ...
Meet the GE FDT Coated Lower Dishrack - your dishwasher's new best friend. Its job is simple but vital. It separates and supports your dishes within the rack, making sure each dish gets a thorough cle...
This part is the replacement tub trim for your dishwasher. It is approximately 26 inches long and 2 inches wide. The tub trim is found on the exterior of the dishwasher, and the main reason you would ...
The lower rack roller supports the smooth sliding of your dishwasher’s bottom rack. Measuring 1.5 inches in diameter and charcoal-colored, this OEM replacement part is sold individually. Replace all f...
This dishwasher latch strike is a manufacturer-approved replacement part for your appliance. The latch strike is an important component in your dishwasher door assembly, and adds an extra layer of sec...
$17.70
Special Order
Questions And Answers for PDT845SSJ0SS
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gary
January 9, 2020
Won"t start, no power on console at door.
For model number PDT845SSJ0SS
Hello Gary, Thank you for the question. If the breaker and outlet have been checked, it could be a defective User Interface Control Board PartSelect Number PS12342779. We hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
James
May 6, 2023
what are the dimensions of the unit w-h-d
For model number PDT845SSJ0SS
Hi James,
Thank you for your question. The dishwasher measures 34 inches high by 23-3/4 inches wide by 24 inches deep. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Manish
February 4, 2024
Where is the heater element located for this model
For model number PDT845SSJ0SS
Hi Manish, thank you for your inquiry. Your model has a hidden heating element. It uses a calrod heating element. We hope this helps.
Was this helpful?
Thank you for voting!
David
January 25, 2022
Does GE have a part number for the dishwasher rack tines? Or, what diameter can be used at the end of the tines to prevent rust on dishes?
For model number PDT845SSJ0SS
Hello David, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part #: PS8767474 and Part #: PS8767473 for the Upper Rack Tine Rows and Part #: PS8767471 and Part #: PS8756516 for the Lower Rack Tine Rows. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1. Turn off breaker supplying power to dishwasher in electrical panel 2. Open dishwasher door 3. Unscrew the screws that secure the dishwasher to the counter. 4. Tip dishwasher forward. Identify the non-functioning door latch. It looks exactly like the replacement. Unclip the wire harness from the door latch. 5. On the inside of the dishwasher, there are 2 screws directly under the door latch. Unscrew them and carefully set aside. 6. Remove old door latch. 7. Set new door latch in place. Holding securely, replace screws removed in step 5. Toward the end they get a little tougher to screw in. 8. Plug wire harness into new door latch. 9. Re-align dishwasher and re-secure to counter in previous position. 10. Test latch to make sure it closes properly. 11. Turn on breaker in electrical panel. The dishwasher should now function properly.
Shut off power at breaker, remove two screws anchoring DW to counter top . Slide DW out far enough to access door latch, disconnect electrical wiring plug, remove two Phillips head screws, install new door latch, repeat installation in reverse order.
