PCS968DR1WW General Electric Range - Overview
Sections of the PCS968DR1WW
[Viewing 5 of 5]
Keep searches simple, eg. "belt" or "pump".
Door Bumper - Black
PartSelect #: PS241365
Manufacturer #: WB2K15
Sold individually.
$13.95
Special Order
Meat Probe Thermistor
PartSelect #: PS1481046
Manufacturer #: WB20T10024
This probe is used to check the internal temperature of the meat to ensure proper temperature is reached. Also known as a Meat Probe.
$77.91
Special Order
Temperature Sensor Kit
PartSelect #: PS236490
Manufacturer #: WB23X5340
This kit includes the sensor as well as the connectors. NOTE This sensor is 2" long.
$124.11
Special Order
BROIL ELEMENT
PartSelect #: PS17626201
Manufacturer #: WB30X46986
If your oven isn’t getting hot enough when you broil, this replacement broil element could be the fix. It’s the part that heats from the top of the oven to give food that crispy finish. Easy to instal...
No Longer Available
Rubber Hinge Bumper
PartSelect #: PS1020952
Manufacturer #: WB02K10112
The rubber bumper sits between the burner and the range itself to ensure the burners do not scrape the stove top. This OEM replacement bumper is sourced directly from the manufacturer, and is sold individually.
$13.95
Special Order
Infinite Switch
PartSelect #: PS1481076
Manufacturer #: WB24T10134
Facing issues with your range? The GE Surface Element Control Switch might be just what you need to get your appliance up and running smoothly again. This key component accomplishes a significant ta...
$228.22
Special Order
ELEMENT RADIANT 6 -9-12 Inch
PartSelect #: PS9864142
Manufacturer #: WS01F01160
This triple radiant surface element is designed for GE electric ranges, offering three heating zones—6 inches, 9 inches, and 12 inches—in one unit for maximum versatility. It adapts to different pot a...
$246.64
In Stock
Order within the next 12 hrs and your part ships today!
Gasket
PartSelect #: PS2321094
Manufacturer #: WB04K10021
This is made of rubber and acts as insulation at the bottom of the door frame, it has hooks at each end to attach to the frame.
$91.97
Special Order
Infinite Control Switch
PartSelect #: PS1517426
Manufacturer #: WB24T10139
Experience the peace of mind cooking again with accuracy and control using our SWITCH INFINITE CONTROL, specially designed for your GE range cooker. This skillfully engineered piece is all about givin...
$228.64
Special Order
Infinite Switch Control
PartSelect #: PS236751
Manufacturer #: WB24T10026
This surface element control switch is for ranges.
Surface element control switch turns the surface element on and off and controls how much heat the element produces.
Unplug the range or shut o...
$69.15
Special Order
Questions And Answers for PCS968DR1WW
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the PCS968DR1WW
[Viewing 8 of 8]Element will not heat
Fixed by
these parts
these parts
Show All
Little to no heat when broiling
Fixed by
these parts
these parts
Show All
Little to no heat when baking
Fixed by
these parts
these parts
Show All
Oven not heating evenly
Fixed by
these parts
these parts
Show All
Oven is too hot
Fixed by
these parts
these parts
Show All
Touchpad does not respond
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Will not program
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven sensor was not holding temperature range.
-
CHARLA from NEW BRAUNFELS, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
48 of 81 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Switch failed
I turned off the circuit breaker and tested the cook top. I pulled the cook top out and laid a piece of plywood over the opening to work on the cook top and not scratch the granite counter top. The mistake I made was to turn the cook top upside down and separate the top from the housing. The dampening springs came off the burners and I could have damaged the elements (but they checked out ok). I turned the whole assembly right side up again and replaced the switch and put it all back together. It works great...thank you for the part.
Parts Used:
-
John from Fresno, CA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
34 of 48 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broiler burnt out.
Removed screws using nut driver. Pulled element way forward until wires came through. Pondered how to detach burned out element from wires. Chickened out, call neighbor who grasped things firmly with two hands and pulled. Old element came loose. Popped in new element. Cursed the screws that wouldn't align with holes to support element; finally did it. Screwed element plate in place. Put oven door back on, plugged it in and turned it on hoping that we hadn't reversed the wires. Job accomplished.
Parts Used:
-
ellen from centennial, CO
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
20 of 24 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!