PCOR30S Dacor Microwave - Overview
Sections of the PCOR30S
[Viewing 4 of 4]Manuals & Care Guides for PCOR30S
Click to downloadInstall
Installation Instructions
(0.57MB)
Install
Installation Instructions
(0.43MB)
Manual
Owner's Manuals
(7.32MB)
Keep searches simple, eg. "belt" or "pump".
SVC-MONITOR SWITCH W FUSE AS;6
PartSelect #: PS17644970
Manufacturer #: DE81-03612A
No Longer Available
Questions And Answers for PCOR30S
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Noel
November 27, 2024
I am missing piece of the door facade : chrome rectangle 2and 1/2” high by 21and 1/2” long that had attached by some sticky stuff to the door. It’s gone missing and I need a replacement
For model number PCOR30S
Hi Noel,
Thank you for your question. The part you are looking for is sold with the door assembly. The part number for the door assembly is PS17566396. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joan
December 7, 2024
My microwave is circling vent system. Does this model have a charcoal filter anywhere?
For model number PCOR30S
Hello Joan, Thank you for writing. The Charcoal Filter for this model is listed as PartSelect #: PS16631827. We hope this helps, good luck with the repair!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Turn table motor
Just take out the appliance from built in frame, if any, remove the glass turn table, disassemble the metal cover (no-tamper screws were a problem), flip it over, unscrew one screw from the motor, unplug the wires (keep track of the connections), install the new motor and wires, reaassemble with regular screws, and reinstall. No big deal.
Parts Used:
-
barb from dana point, CA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
2 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!