The temperature sensor detects the temperature within the oven cavity. If your oven is too hot, not heating evenly, or has little to no heat when baking, you may need to replace the temperature sensor...
The rubber bumper sits between the burner and the range itself to ensure the burners do not scrape the stove top. This OEM replacement bumper is sourced directly from the manufacturer, and is sold individually.
Having trouble with your wobbly GE range? Our adjustable leveling leg is the simple solution you've been looking for. When your range isn't sitting perfectly even, it can lead to a host of issues from...
This broil unit generates high heat for broiling and finishing cooking tasks. It is designed to deliver consistent heat output for effective cooking performance. Replacing a worn or damaged broil unit...
$126.86
In Stock
Order within the next 40 mins and your part ships today!
This triple radiant surface element is designed for GE electric ranges, offering three heating zones—6 inches, 9 inches, and 12 inches—in one unit for maximum versatility. It adapts to different pot a...
$246.64
In Stock
Order within the next 40 mins and your part ships today!
Is your GE range's knob assembly worn out or missing? Don't worry, we have the perfect replacement for you! Our GE Surface Burner Knob Assembly is designed to not only refresh the look of your range b...
This 6-inch radiant surface element delivers efficient, even heating for precise cooking performance. Designed for durability and quick response, it provides reliable heat control for a variety of rec...
$137.55
In Stock
Order within the next 40 mins and your part ships today!
Struggling with your stove's underperformance? We've got your back with the GE Radiant Bridge Element! This replacement part is tailor-made to boost your cooking by providing essential heat exactly wh...
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ivana
February 17, 2023
My range cooktop has a "hot surface" indicator light for each burner as well as a control on/off knob. The tri - ring element isn't turning on. Where can I order/purchase a new tri-element?
For model number PCB980SF3SS
Hello Ivana, thank you for your questions. We sell the Tri Element on our site as PS10066596. We hope to hear from you soon.
My stove elements do not turn on regardless of which switch i turn on, i assume it's not the elements or switches because it wouldn't happen to all of them at the same time. Would the control board cause this i would like to order the part just want to make sure.
For model number PCB980SF3SS
Hello Miro, thank you for your question. The control board regulates the oven, it doesn't affect the top burners. It sounds like an issue with the burner switch and harness assembly. Unfortunately, that part is showing as being discontinued and is no longer available.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Removed six 1/4" hex nuts on rear of oven. Then through front/inside removed a single 1/4" hex nut to actually remove sensor. Unplug sensor connector, remove. Reversed steps, push oven back in place and plugged in. Tested oven function.
The existing terminal block on my Ge oven/Range had melted due to a loose wire causing sparking and starting the plastic casing of the terminal block on fire and melting it, Part select made the part easy to find and had it at my house in 2 days. All I had to do was remove six screws to take the back sheet metal cover off of the oven. Unscrew the terminal connections remove two mounting screws that held the terminal on to the oven body. This was a little trickier than it should have been because the melted plastic had reformed making it very hard to access the mounting screws. i then mounted the new piece and plugged the oven in, it took 15 minutes and was very easy. definitely saved me at-least a $100 for the service call i would have made if finding the part wasn't so convenient
Unplugged appliance and removed 5 screws on back of stove/oven and removed plate. Disconnected the sensor and unscrewed it on the inside of the oven. Pulled the cord through and replaced with new sensor. Replaced all parts and plugged in the appliance and tested. Worked great.
