If your stove’s burner isn’t heating right—maybe it’s stuck on high or won’t turn on at all—this control switch could be the fix. It’s made for 6-inch burners and lets you adjust the heat smoothly, no...
The rubber bumper sits between the burner and the range itself to ensure the burners do not scrape the stove top. This OEM replacement bumper is sourced directly from the manufacturer, and is sold individually.
Having trouble with your wobbly GE range? Our adjustable leveling leg is the simple solution you've been looking for. When your range isn't sitting perfectly even, it can lead to a host of issues from...
This broil unit generates high heat for broiling and finishing cooking tasks. It is designed to deliver consistent heat output for effective cooking performance. Replacing a worn or damaged broil unit...
$126.86
In Stock
Order within the next 5 hrs and your part ships today!
This triple radiant surface element is designed for GE electric ranges, offering three heating zones—6 inches, 9 inches, and 12 inches—in one unit for maximum versatility. It adapts to different pot a...
$246.64
In Stock
Order within the next 5 hrs and your part ships today!
This surface element switch controls the activation and heat level of a cooking element. It allows precise adjustment for different cooking needs. Replacing a faulty switch restores proper heat contro...
$105.74
In Stock
Order within the next 5 hrs and your part ships today!
Questions And Answers for PCB969SR2SS
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Domenico
March 20, 2022
HI, ALL 4 TOP BURNERS NOT WORKING ,THE OVEN WORKS FINE,THANKS
For model number PCB969SR2SS
Hi Domenico,
Thank you for your question. If all 4 of your burners are not working, check and see if the power cord is securely plugged in. If the cord is securely plugged in, it may not be wired correctly. It may need to be replaced or you may have to have a technician come and inspect the wiring in the stove. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
Removed oven from cabinet. unblug old sensor pluged in new and reinstalled oven. Esay repair though wish oven was designed so did not have to pull itout of cabinet which requires disconect electric cabel
I downloaded the installaion manual from the web for this model. First htings first, I located the circuit breaker for the oven and turned it off. Removed the lower trim piece from the bottom, next lifted the oven door off its hinges and set it to the side. I then wrapped a couple of small towels around the hinges for the door as per the manual (the hinges can pinch a finger). I then removed the four screws which secured the oven into the cabinet. Next I slid the oven forward allowing me access to the rear. I removed the pieces from the rear to gain access to the sensors connector, and unpl;ugged the sensor. Went around to the front and unscrewed the 2 screws securing the sensor and removed it. I then installed the new sensor, replaced the rear covers, slid the oven back into the cabinet, secured the four screws, snapped on the lower trim, remounted the oven door, and turned the breaker on. Oven working fine now.
