This 40-Watt light bulb is sold individually.
It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges,...
The temperature sensor detects the temperature within the oven cavity. If your oven is too hot, not heating evenly, or has little to no heat when baking, you may need to replace the temperature sensor...
This part is the replacement light socket for your oven. The oven light socket provides power to the light, and at the same time holds the light bulb in place.
This surface element is for ranges. Surface elements supply the heat to a cooking area on top of the range. Unplug the range or shut off the house circuit breaker for the range before installing this ...
This part is the replacement oven bulb lens cover. It is made of glass and is approximately 3 inches in diameter. The lens cover is rigid and protects the oven light bulb from being damaged. The main ...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
DOUGLAS
November 30, 2023
IS THERE A ROLLER OVEN RACK FOR THIS MODEL? (SIMILAR TO THE CAFE' OVER ROLLER RACK?)
For model number PB965YP4FS
Hello Douglas, thank you for reaching out. According to our research, the roller rack for your model is part number PS16618843. If you need help placing an order, customer service is open 7 days a week!
Was this helpful?
Thank you for voting!
Roz
March 20, 2026
both top and bottom oven go into preheat when bake and start pushed, does not preheat to temperature shuts off and what ever temp is made
For model number PB965YP4fs
Hi Roz, thank you for getting in touch. The issue seems to be with the temperature sensor, part number PS10059162. If it sends an incorrect signal to the control board, even for just a second, the oven may falsely detect overheating and shut down as a safety precaution. You may need to replace it to fix the issue. We hope this sorts out your problem!
Need to purchase replacement for Mai top glass assembly which is cracked. Can you help.
For model number PB965YP4FS
Hello Robyn, thank you for the question. The glass main top, part number PS16542359, is compatible with your model number. We hope this is what you were looking for!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Removed six 1/4" hex nuts on rear of oven. Then through front/inside removed a single 1/4" hex nut to actually remove sensor. Unplug sensor connector, remove. Reversed steps, push oven back in place and plugged in. Tested oven function.
I had to remove the oven from the wall because the sensor plug connction is behind the unit. Two screws hold the sensor inside the oven and then I disconnected the lead and pulled the sensor out from the front. I installed the new sensor, tightened the two screws holding it in and connected the lead. Then reinstalled the oven into the wall. Overall, a very easy repair once you get the oven out.
Unplugged appliance and removed 5 screws on back of stove/oven and removed plate. Disconnected the sensor and unscrewed it on the inside of the oven. Pulled the cord through and replaced with new sensor. Replaced all parts and plugged in the appliance and tested. Worked great.
