Models > PB960EJ8ES

PB960EJ8ES General Electric Range - Overview

Sections of the PB960EJ8ES

[Viewing 7 of 7]
Keep searches simple, eg. "belt" or "pump".
Light Bulb - 40W – Part Number: 40A15
Light Bulb - 40W
★★★★★
★★★★★
(2)
PartSelect #: PS217532
Manufacturer #: 40A15
This 40-Watt light bulb is sold individually and is a genuine OEM replacement option for your home appliances. It is specially designed to withstand extreme temperatures, so this bulb is compatible wi...
$5.85
  Special Order
Oven Sensor – Part Number: WB23T10015
Oven Sensor
★★★★★
★★★★★
(9)
PartSelect #: PS236398
Manufacturer #: WB23T10015
This temperature sensor detects the temperature within the oven cavity.
$59.44
  Special Order
Oven Bulb Lens Cover - Glass – Part Number: WB25T10002
Oven Bulb Lens Cover - Glass
★★★★★
★★★★★
(3)
PartSelect #: PS237483
Manufacturer #: WB25T10002
This part is the replacement oven bulb lens cover. It is made of glass and is approximately 3 inches in diameter. The lens cover is rigid and protects the oven light bulb from being damaged. The main ...
$28.88
  Special Order
ELEMENT HALIANT 12 TRIPLE – Part Number: WB30T10155
ELEMENT HALIANT 12 TRIPLE
PartSelect #: PS8754838
Manufacturer #: WB30T10155
This surface element is for ranges. Surface element supplies the heat to a cooking area on top of the range. Unplug the range or shut off the house circuit breaker for the range before installin...
$314.21
  Special Order
HUB BLADE Assembly – Part Number: WB02T10289
HUB BLADE Assembly
PartSelect #: PS1020933
Manufacturer #: WB02T10289
$34.10
  Special Order
SWITCH SPDT HIGH AMP – Part Number: WB24T10147
SWITCH SPDT HIGH AMP
PartSelect #: PS1765837
Manufacturer #: WB24T10147
This light switch is controlled by opening and closing the oven door
$39.96
  Special Order
Oven Light Housing – Part Number: WB08T10002
Oven Light Housing
PartSelect #: PS230438
Manufacturer #: WB08T10002
Must buy bulb locally as per manufacturer.
$75.73
  Special Order
LAMP HALOGEN G9 – Part Number: WB08T10045
LAMP HALOGEN G9
PartSelect #: PS3491475
Manufacturer #: WB08T10045
$30.58
  Special Order
SCREW 10-32 TR T – Part Number: WB01T10008
SCREW 10-32 TR T
PartSelect #: PS222157
Manufacturer #: WB01T10008
This part is a replacement screw for your oven. It is made of black metal and is sold individually. This screw is approximately 1/4 inch in diameter and about 1/2 inch in length. It is designed to con...
$11.80
  Special Order
ELEMENT HALIANT (DUAL) – Part Number: WB30T10135
ELEMENT HALIANT (DUAL)
PartSelect #: PS2321569
Manufacturer #: WB30T10135
$192.26
  Special Order
MODULE INDICATOR LIGHT – Part Number: WB25T10050
MODULE INDICATOR LIGHT
PartSelect #: PS1019157
Manufacturer #: WB25T10050
$52.74
  Special Order
RELAY – Part Number: WB18T10352
RELAY
PartSelect #: PS953104
Manufacturer #: WB18T10352
$182.10
  Special Order

Questions And Answers for PB960EJ8ES

Be the first to ask our experts a question about this model!

Common Symptoms of the PB960EJ8ES

[Viewing 5 of 5]
Element will not heat
Fixed by
these parts
Fixing Fixing Fixing
Show All
Little to no heat when baking
Fixed by
these parts
Fixing
Show All
Oven not heating evenly
Fixed by
these parts
Fixing
Show All
Oven is too hot
Fixed by
these parts
Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven was not coming up to temperature
I had to remove the oven from the wall because the sensor plug connction is behind the unit. Two screws hold the sensor inside the oven and then I disconnected the lead and pulled the sensor out from the front. I installed the new sensor, tightened the two screws holding it in and connected the lead. Then reinstalled the oven into the wall. Overall, a very easy repair once you get the oven out.
Parts Used:
Oven Sensor
  • Sean from Highlands Ranch, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
55 of 69 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
terminal block melted
The existing terminal block on my Ge oven/Range had melted due to a loose wire causing sparking and starting the plastic casing of the terminal block on fire and melting it, Part select made the part easy to find and had it at my house in 2 days. All I had to do was remove six screws to take the back sheet metal cover off of the oven. Unscrew the terminal connections remove two mounting screws that held the terminal on to the oven body. This was a little trickier than it should have been because the melted plastic had reformed making it very hard to access the mounting screws. i then mounted the new piece and plugged the oven in, it took 15 minutes and was very easy. definitely saved me at-least a $100 for the service call i would have made if finding the part wasn't so convenient
Parts Used:
Terminal Block Kit
  • jonathan from willow springs, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
53 of 68 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven Lamp Holder Burned
removed two phillips screws. Unplugged electrical connections replaced unit from PartSelect. They sent holder cover and new bulb (surprise). Great store with great directions.
Parts Used:
Oven Light Housing
  • Jack from Okmulgee, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
23 of 28 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!