This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$15.95
In Stock
Order within the next 6 hrs and your part ships today!
If your washer is noisy, spins slowly, or leaves clothes soaking wet, this splutch cam kit might be the fix. It helps your machine switch between washing and spinning by connecting the motor to the ba...
$49.29
In Stock
Order within the next 6 hrs and your part ships today!
If your washer isn’t spinning or making strange noises, the drive belt might be worn out. This genuine replacement belt connects the motor to the drum, helping it spin and tumble your clothes properly...
$35.94
In Stock
Order within the next 6 hrs and your part ships today!
This lid switch assembly is for a top load washer. The lid switch assembly detects if the washer lid is open or closed and prevents the washer from spinning when the lid is open.
$156.54
In Stock
Order within the next 6 hrs and your part ships today!
This 6-pin shift actuator is a genuine replacement part designed for use in select washing machines. It plays a critical role in controlling the movement of the transmission, allowing the appliance to...
$68.42
In Stock
Order within the next 6 hrs and your part ships today!
This suspension rod kit includes four rods that stabilize the wash tub, reducing vibrations and movement during cycles. It is compatible with a range of washing machines and helps improve performance ...
$113.97
In Stock
Order within the next 6 hrs and your part ships today!
Having a problem with a funky-smelling washing machine, or one that just doesn't seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This p...
$25.31
In Stock
Order within the next 6 hrs and your part ships today!
Struggling with a leaky washing machine? Don't despair! The Whirlpool Washer Tub Seal is here to save the day. Think of this as the secret weapon in your washer's arsenal. Nestled in the heart of your...
$81.91
In Stock
Order within the next 6 hrs and your part ships today!
This washing machine drain pump is an essential component responsible for efficiently removing wastewater during the drain cycle. Located at the bottom of the appliance, it operates by generating suct...
$78.69
In Stock
Order within the next 6 hrs and your part ships today!
Questions And Answers for NTW4605EW0
Ask our experts a question about this model and we'll get back to you as soon as possible!
47 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tony
January 27, 2020
I have a piece of a necklace sticking out from under the agitator, How do I lift the agitator out so as to remove this?
For model number NTW4605EW0
Hi Tony,
Thank you for your question. To remove the agitator, you will first need to remove the dispenser cap on the top of the agitator and expose the bolt underneath. Then you will just need to remove the bolt and then pull up on the agitator to remove it. We hope this helps. Thank you and have a great day.
12 people found this helpful.
Was this helpful?
Thank you for voting!
Debbie
February 23, 2020
Washer won't start. No power comes on but there is power to the outlet that it is plugged in to.
For model number NTW4605EW0
Hello, Thank you for your question. You will want to check into the door latch and the knobs that you use to operate the machine. The lock will not allow the unit to start is there is a short or it is not reading the door is closed. That is part#PS12704713. We hope this helps, good luck with this repair.
7 people found this helpful.
Was this helpful?
Thank you for voting!
Brian
March 2, 2020
I just replaced the lid lock on my washer. Now that that is in it wont fill lid lock light wont come on. Do i have to unlock them when there new?
For model number NTW4605EW0
Hello Brian, thank you for your question. Yes, It is possible that the latch was engaged in the lock position and not allowing the strike to enter the latch assembly. If you disconnect the lock from the control while the unit is turned off, you can test the lock to see if it is in the locked state. If you test the blue wire to the white wire for resistance, if it reads 0 ohms then it is in the locked state. If it reads infinite, then the lock is in the open position. This will help to identify if the lock is in the locked position. If it is in the locked position contact customer service to return the part and a new latch should be ordered. I hope this helps.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Lalo
December 23, 2019
6 year old Amana marking loud ratcheting sound .I replaced the worn cam and actuator , still having same problem. What else should i be looking for to replace .
For model number NTW4605EW0
Hello Lalo and thank you for writing.
It certainly sounds like a faulty pulley PS10057144 and/or belt PS11747978 you should check for signs of damage, and replace it if needed. We hope this helps. Please contact us anytime.
Machine is going off balance but not every load. Could it be something under the drum or the springs and does the lid pop up.
For model number NTW4605EW0
Hello Becky, Thank you for the question. I suggest checking the Suspension Rod Kit, PartSelect Number PS11703288 for wear or damage. We hope this helps!
Well, first investigated and found loose nut on drive clutch. First take off the two screws with nut drive then cover off using a screwdriver blade to snap off the cover. Then socket ratchet to take off the nut on drive clutch. take off belt by slowly rotating the drive gear. two screws that hold the electronics to the upper drive clutch and put aside, so you can snap off the cover for drive clutch on upper part with screwdriver and off the parts come and install whole unit back as took it apart. Line up the new upper clutch so that is position as was before. (Using parts diagram helps a lot as www. partsselect.com has for you or Maytag.com.) Then put the electronic part board back on and the gear and nut. Make sure it is tight by several attempts to make sure it's snugged up good and then slowly roll belt back on the pulley and motor drive. Put your cover guard back on with two screws and done.
Replaced the 4 suspension rods/springs. Only disconnect and replace one at a time. The tub will fall out if you disconnect and replace more than one rod/spring at a time.
